Balancing speed-torque trade-off in a piezoelectric inchworm rotary actuator via amplified-torsional flexures
- 1 August 2026
- journal article
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 35 (8) , 08LT01
Abstract
A major challenge in designing piezoelectric inchworm rotary actuators is to balance rotational speed, load capacity, and output torque while retaining power-off self-locking capability and relaxed assembly tolerance. This study presents the design and experimental evaluation of a piezoelectric inchworm rotary actuator that achieves balanced rotational performance and integrated pre-tightening regulation through a hybrid amplified-torsional flexure stator. Double-output rhombus-type compliant clamping and driving mechanisms are combined with torsional flexures to increase the angular step size and provide self-locking functionality. A pre-tightening flexure mechanism is incorporated into a built-in architecture, with the entire rotary stator housed inside the rotor, thereby ensuring structural compactness and ease of assembly. A prototype with dimensions of Φ90 mm × 55 mm is fabricated and experimentally tested. The experimental results demonstrate a maximum velocity of 99.2 mrad s −1 at 40 Hz, an output torque exceeding 453.1 N·mm, and a vertical load capacity of up to 10 kg. In addition, a minimum rotary step of 2.66 μ rad is obtained at a driving voltage of 0.06 V. Good bidirectional consistency is also achieved through the shortened actuation chain, demonstrating the promising performance enabled by the hybrid amplified-torsional compliant driving mechanism.Keywords
Funding Information
- Gusu Innovation and Entrepreneurship Leading Talent Project (ZXL2023155)
This publication has 33 references indexed in Scilit:
- A novel miniature multi-DOF three-ring-shaped piezoelectric actuator for small and lightweight robot jointsPrecision Engineering, 2025
- Phase structure deciphering for pure polymers with a giant piezoelectric responseProgress in Materials Science, 2024
- Compact stick–slip piezoelectric rotary motor with reduced undesired backward motionMicrosystem Technologies, 2024
- Modeling and controlling a rotary piezo actuatorSensors and Actuators A: Physical, 2023
- Development and analysis of a stick-slip rotary piezoelectric positioner achieving high velocity with compact structureMechanical Systems and Signal Processing, 2020
- Piezoelectric inchworm rotary actuator with high driving torque and self-locking abilitySensors and Actuators A: Physical, 2018
- A novel inchworm type piezoelectric rotary actuator with large output torque: Design, analysis and experimental performancePrecision Engineering, 2018
- A novel piezo-driven linear-rotary inchworm actuatorSensors and Actuators A: Physical, 2015
- Development of a compact 2-DOF precision piezoelectric positioning platform based on inchworm principleSensors and Actuators A: Physical, 2015
- A piezoelectric-driven rotary actuator by means of inchworm motionSensors and Actuators A: Physical, 2013