Is the transverse screw really necessary? Biomechanical comparison of fixation strategies in periasetabular osteotomy
Open Access
- 5 May 2026
- journal article
- Published by Oxford University Press (OUP) in Journal of Hip Preservation Surgery
Abstract
This study aims to compare the biomechanical stability of different screw and plate configurations used in the fixation of acetabular fragments after periacetabular osteotomy (PAO). A total of 42 synthetic hemipelvis models were categorized into six fixation groups: three iliac screws (3 V), four iliac screws (4 V), three screws + lateral compression (LC) screw (3 V + LC), locking three-screw plate (3P), plate + LC screw (3P + LC), and eight-screw plate (4P). All samples were evaluated for stiffness under a constant load of 700 N and for stiffness under maximum load. The greatest failure load was observed in the 3 V group (1249.4 N), whereas the 3P group demonstrated the lowest (658.5 N). In terms of maximum force, both the 3 V and 4 V groups were significantly superior to the 3P (P = .003 and P = .018, respectively) and 3P + LC (P = .006 and P = .021, respectively) groups. Although the 4P configuration showed the highest fracture stiffness (155.1 N/mm), this did not differ significantly among groups. Stiffness at a constant load of 700 N, the 3 V and 3 V + LC groups demonstrated higher stiffness than the 3P and 3P + LC groups, with comparisons to the 3P group approaching statistical significance (P = .064 and P = .063, respectively). Traditional iliac screw structures (especially 3 V and 4 V) provide effective fixation in terms of load-bearing and stiffness, while plate-based systems require a high number of screws and optimal placement to provide adequate stability. Although the LC screw increases stiffness, it provides only a limited contribution to breaking strength.Keywords
This publication has 17 references indexed in Scilit:
- Fixation of the mobile fragment in periacetabular osteotomy: a clinical study of two- vs. three-screw fixation with 4-week partial weight bearingArchives of orthopaedic and trauma surgery, 2025
- In Vitro Investigation of Column Fixation Constructs for Periacetabular Osteotomy: Which Provide the Greatest Stiffness and Strength?Arthroplasty Today, 2024
- Effects of degree of translation or rotation of acetabular fragment of periacetabular osteotomy procedure on pelvic X-ray parametersJournal of Hip Preservation Surgery, 2022
- Is transverse screw fixation really necessary in PAO?—A comparative in vivo studyJournal of Hip Preservation Surgery, 2021
- The Bernese Periacetabular OsteotomyOrthopedics and Traumatology, 2002
- Periacetabular Osteotomy Through the Smith-Petersen ApproachClinical Orthopaedics and Related Research, 1999
- Technical Complications of the Bernese Periacetabular OsteotomyClinical Orthopaedics and Related Research, 1999
- Early Experience and Results With the Periacetabular OsteotomyClinical Orthopaedics and Related Research, 1999
- The unstable iliac fracture: a biomechanical evaluation of internal fixationInjury, 1997
- A New Periacetabular Osteotomy for the Treatment of Hip Dysplasias Technique and Preliminary ResultsClinical Orthopaedics and Related Research, 1988