Laser Differential Confocal Freeform Surface Shape Measurement Based on Monitoring and Compensation of Translational Motion Error
- 9 January 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-8
Abstract
The manufacturing accuracy of freeform surface is limited by its detection accuracy. In this paper, a laser differential confocal freeform surface shape measurement method based on translational motion error monitoring and compensation is proposed. This method realizes helical scanning measurements of a freeform surface via sensor translation and freeform surface rotation. Based on normal tracking principle, a position-sensitive detector is used to track the normal direction, solving the problem of large inclination freeform surface measurements limited by the maximum measurable inclination of the sensor. The laser differential confocal sensor is used to precisely focus of the surface, realizing a high-spatial-resolution measurement of the surface normal vector, with an axial resolution of up to 1 nm. By introducing a reference frame into the system, an independent translational motion reference is provided for freeform surface measurement. By monitoring, decoupling and compensating the 2D translational motion errors, the impact of these errors on measurement accuracy is greatly reduced. High-accuracy freeform surface shape measurement is finally realized. The experimental results show that after error compensation, the PV repeatability is superior to ±50 nm (3σ), RMS repeatability is superior to ±14 nm (3σ), and the measurement results are close to the standard values, enabling high-accuracy measurement of freeform surface shapes.Keywords
Funding Information
- National Natural Science Foundation of China (52327806)
- Civil Aerospace Technology Advance Research Project (D020402)
This publication has 20 references indexed in Scilit:
- Geometric analysis of measurement errors in a surface metrology class with closed-loop probesMeasurement, 2021
- Design of two-mirror telescope systems with freeform surfaces: modified configurations and analysisJournal of Astronomical Telescopes, Instruments, and Systems, 2021
- Measurement of Freeform Optical Surfaces: Trade‐Off between Accuracy and Dynamic RangeLaser & Photonics Reviews, 2020
- Simultaneous removal of nonrotationally symmetric errors in tilted wave interferometryOptical Engineering, 2019
- Modeling of curved diamond wheel errors for improvement of freeform grinding accuracyThe International Journal of Advanced Manufacturing Technology, 2019
- Experimental investigations on characterization of freeform wavefront using Shack–Hartmann sensorOptical Engineering, 2017
- Fast tool servo diamond turning of optical freeform surfaces for rear-view mirrorsThe International Journal of Advanced Manufacturing Technology, 2015
- Spiral tool path generation for diamond turning optical freeform surfaces of quasi-revolutionComputer-Aided Design, 2015
- Swing arm optical coordinate-measuring machine: high precision measuring ground aspheric surfaces using a laser triangulation probeOptical Engineering, 2012
- Measurement and compensation of error motions of a diamond turning machinePrecision Engineering, 2007