Numerical investigation on progressive collapse resistance of steel-concrete composite floor systems
- 2 March 2020
- journal article
- research article
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 17 (2) , 202-216
Abstract
Steel-concrete composite floor systems are commonly used in steel buildings. Stability under gravity and lateral loading depends on these systems. To better understand the design parameters that govern the progressive collapse behaviour of steel-concrete composite floor systems, high-resolution finite-element analyses (FEA) is conducted. Steel fracture and concrete damage are explicitly considered in the finite-element model (FEM). The model is validated using full-scale test data including comparison of the measured response and failure modes. The validated model is used to conduct a parametric study to investigate untested parameters including (i) concrete strength, (ii) horizontal constraint, (iii) steel deck thickness, (iv) reinforcement ratio in the composite slab, and (v) the number of the shear studs. The simulation results are used to determine the optimum design to increase progressive collapse resistance. Specifically, it is found that increasing the continuity and the horizontal constraint of the steel deck, the steel deck thickness, and number of shear studs increase this resistance. Considering the steel consumption and the common practice in the construction, improving the continuity and the horizontal constraint of the steel deck are the best choices to improve the collapse resistance.Keywords
This publication has 37 references indexed in Scilit:
- Three-Dimensional Composite Floor Systems under Column-Removal ScenariosJournal of Structural Engineering, 2018
- Load-resisting mechanisms of 3D composite floor systems under internal column-removal scenarioEngineering Structures, 2017
- Evaluation of Structural Robustness against Column Loss: Methodology and Application to RC Frame BuildingsJournal of Structural Engineering, 2017
- Influence of Design Parameters on Tensile Membrane Action in Reinforced Concrete SlabsStructural Engineering International, 2015
- Analytical assessment of steel frames progressive collapse vulnerability to corner column lossJournal of Constructional Steel Research, 2014
- Loss-of-stability induced progressive collapse modes in 3D steel moment framesStructure and Infrastructure Engineering, 2014
- A design-oriented model for the collapse resistance of composite floors subjected to column lossJournal of Constructional Steel Research, 2011
- 3-D nonlinear dynamic progressive collapse analysis of multi-storey steel composite frame buildings — Parametric studyEngineering Structures, 2010
- Progressive Collapse Resistance of Steel-Concrete Composite FloorsJournal of Structural Engineering, 2010
- Explicit algorithms for the nonlinear dynamics of shellsComputer Methods in Applied Mechanics and Engineering, 1984