Single-stage single point incremental square hole flanging of AA5052 material
- 19 October 2022
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 38 (6) , 680-691
Abstract
Single-point incremental forming process is a cost-effective die-less process to form sheet metal parts. To implement the forming method in industrial applications, it is required to study forming of various shapes. The available literature on hole flanging by single-point incremental forming is mostly focused on cylindrical flanges and very few studies on the square flange are available. The available study on the square flange is based on multistage experiments. The single-stage forming can reduce the forming time significantly. Therefore, in this work, the single-stage single-point square hole flanging of AA5052-H32 sheet material has been studied. A process-specific fracture forming limit line is obtained by single point incremental hole flanging experiments to analyze the strain behavior during the forming of flanges. A definition of Limit Forming Ratio for square flanging has been proposed and its value for the flange forming has been obtained experimentally. The effect of precut square hole length, pre-cut square hole corner radius, and tool rotation on flange formability has been studied and presented. Moreover, forming forces evolving during the process, the microstructure of the material, and the surface roughness of the flange are analyzed and presented. The results show that the flange formability increases with increase in the pre-cut square hole corner radius; the tool rotation reduces the flange formability and increases the surface roughness.Keywords
Funding Information
- Nirma University (NU/Ph.D/MRP/IT/2021-22)
This publication has 31 references indexed in Scilit:
- Formability limits by fracture in sheet metal formingJournal of Materials Processing Technology, 2014
- Towards square hole-flanging produced by single point incremental formingProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2014
- On the relative performance of hole-flanging by incremental sheet forming and conventional press-workingProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2013
- Incremental Forming of Hole-Flanges in Polymer SheetsMaterials and Manufacturing Processes, 2013
- Guidelines for Tool-Size Selection for Single-Point Incremental Forming of an Aerospace AlloyMaterials and Manufacturing Processes, 2013
- On the formability of hole-flanging by incremental sheet formingProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2013
- Studies on hole-flanging process using multistage incremental formingCIRP Journal of Manufacturing Science and Technology, 2010
- Single‐point incremental forming and formability—failure diagramsThe Journal of Strain Analysis for Engineering Design, 2008
- A force measuring based strategy for failure prevention in incremental formingJournal of Materials Processing Technology, 2006
- Forming limit diagrams for single-point incremental forming of aluminium sheetProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2005