The Microstructure and Properties of Laser-Cladded Ni-Based Self-Fluxing Alloy Coatings Reinforced by TiC Particles
Open Access
Abstract
In this study, NiCrBSi composite coatings reinforced with 5–15 wt.% TiC particles were prepared using laser cladding to investigate the influence of the TiC content and laser beam power on the coatings’ quality, structure, and properties. Penetrant tests revealed the presence of cracks in the composite coatings, which were reduced with the higher laser power due to a decrease in cooling rate. A macroscopic analysis showed that pure NiCrBSi coatings exhibited a high quality and were free of defects, while the addition of TiC particles led to the formation of large pores, particularly in coatings produced with a lower laser power. Microstructural characterization was conducted using Scanning Electron Microscopy (SEM), Energy-Dispersive Spectroscopy (EDS), and X-ray Diffraction (XRD). The microstructure of the pure NiCrBSi coatings consisted of an austenitic matrix with chromium-based precipitates (carbides and borides). Variations in structural morphology across different regions of the coatings and under varying laser powers were described. When TiC particles were added, partial dissolution occurred in the molten pool, enriching it with titanium and carbon, which subsequently led to the precipitation of titanium carbides. The average microhardness of the composite coatings increased by 28%–40% compared to the pure NiCrBSi coating, while the erosion resistance remained comparable. Solid particle erosion tests in accordance with the ASTM G76-18 standard resulted in average erosion values of the pure NiCrBSi coating of 0.0056 and 0.0025 mm3/g for the 30° and 90° impingement angles, respectively.Keywords
This publication has 48 references indexed in Scilit:
- A Review on Effect of Cooling Rate on Metallurgical, Mechanical, Geometrical Characteristics and Defects of Laser Cladding ProcessLasers in Manufacturing and Materials Processing, 2024
- Laser assisted fabrication of mechanochemically robust Ti3Au intermetallic at Au-Ti interfaceEngineering Science and Technology, an International Journal, 2023
- Dry Sliding Wear Characteristics of NiP/TiN Duplex Coated Aluminum Alloy and Wear Analysis Using Response Surface MethodJournal of Materials Engineering and Performance, 2022
- Investigation on crack behavior of Ni60A alloy coating produced by coaxial laser claddingJournal of Materials Science, 2021
- A Review on the Nickel Based Metal Matrix Composite CoatingMetals and Materials International, 2020
- Investigation of the Microstructure and Properties of NiCrBSi Coating Obtained by Laser Cladding with Different Process ParametersTransactions of the Indian Institute of Metals, 2020
- Properties and High-Temperature Wear Behavior of Remelted NiCrBSi CoatingsJOM, 2019
- A Novel Strategy for Depositing Dense Self-fluxing Alloy Coatings with Sufficiently Bonded Splats by One-Step Atmospheric Plasma SprayingJournal of Thermal Spray Technology, 2019
- Surface and Subsurface Characteristics of NiCrBSi Coating with Different WC Amount Prepared by Flame Spray MethodJournal of Thermal Spray Technology, 2019
- Evaluating the Effect of Hardness on Erosion Characteristics of Aluminum and SteelsJournal of Materials Engineering and Performance, 2014