Fatigue crack growth in aluminum alloy from cold expanded hole with preexisting crack
Open Access
- 1 January 2020
- journal article
- research article
- Published by Ternopil Ivan Puluj National Technical University in Scientific journal of the Ternopil national technical university
- Vol. 99 (3) , 5-16
Abstract
The fatigue life of aircraft structure elements with operational damage in the vicinity of the hole was investigated. The plates 60 mm wide and 6 mm thick made of D16chT aluminum alloy with a central hole were taken for the study. Fatigue damage was examined with an corner quarter-elliptical fatigue crack with a length of 1,25 mm, which was initiated from an edge notch of 0,5 x 0,5 mm. The fatigue crack growth rate on the surface of the plate after mandrel hole with cold expansion degree i = 2,7% increases up to15 times and residual lifetime in three times compared to the virgin plate.Keywords
This publication has 12 references indexed in Scilit:
- Interrelation and kinetics of matersals fatigue damage under strain- and stress-control loading modesScientific journal of the Ternopil national technical university, 2018
- Investigation on fatigue performance of cold expansion holes of 6061-T6 aluminum alloyInternational Journal of Fatigue, 2017
- Combined Cold Expansion and Friction Stir Processing of Fastener Holes in Aluminum Alloy Al-2014-T6Transactions of the Indian Institute of Metals, 2016
- Cold expansion technology of connection holes in aircraft structures: A review and prospectChinese Journal of Aeronautics, 2015
- Formation of Residual Stresses in Plates with Functional Holes After MandrellingMaterials Science, 2015
- Fatigue life of cold‐expanded fastener holes with interference‐fit fasteners at short edge marginsFatigue & Fracture of Engineering Materials & Structures, 2014
- Cold expansion effects on cracked fastener holes under constant amplitude and spectrum loading in the 2024-T351 aluminum alloyInternational Journal of Fatigue, 2014
- Identifying the residual stress field developed by hole cold expansion using finite element analysisFatigue & Fracture of Engineering Materials & Structures, 2011
- Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al 2024 T3 alloy – An experimental studyEngineering Failure Analysis, 2010
- EXPERIMENTAL INVESTIGATION ON THE EFFECTS OF COLD EXPANSION OF FASTENER HOLESFatigue & Fracture of Engineering Materials & Structures, 1998