Abstract
The study of energy harvesting from mechanical vibrations using piezoelectric materials is important due to their high electrical charge density, which make these devices adequate for compact systems. However, since the available energy for conversion is limited, efficient designs are required. Furthermore, device durability remains underexplored despite its critical importance, as vibrations can induce fatigue in piezoelectric sensors and degrade their properties. This work proposes the design of beam-type devices with an integrated piezoelectric patch, simultaneously considering the electrical power generated and the bending stress on the patch as conflicting objectives. Through multi-objective optimization, the design seeks to maximize harvested power and minimize bending stress, while accounting for uncertainties in material parameters to quantify variation in bending stress response. The originality of this work lies in integrating durability into the optimization framework by evaluating the surface stress of the piezoelectric layer with reliability methods (first order reliability method and Monte Carlo simulation) and extending the approach to the design of different resonant devices. The results show that shorter beams generate higher power but higher stress, whereas longer beams reduce stress and variability. A shorter device produced 128.8 mW with 96% probability of failure, while a longer device produced 74.8 mW with 22%, highlighting the trade-off between performance and durability. For a given allowable stress value, substituting a shorter beam device with a longer one tends to significantly reduce the probability of failure, making it more suitable for applications where durability is critical, such as long-term structural health monitoring in bridges or aerospace components.
Funding Information
  • UNICAMP (303582/2023-5)
  • Universidade Estadual de Campinas (UNICAMP) (Postdoctoral Researcher Program (PPPD))

This publication has 31 references indexed in Scilit: