Auteliano Antunes Santos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Auteliano Antunes Santos has a total of 104 co-authors. Here are the top co-authors by number of shared publications:
- Jony Javorski Eckert
Department of Integrated Systems, School of Mechanical Engineering - FEM, University of Campinas - UNICAMP, Campinas, Brazil
6 shared publications - Thiago Silva Martins
Vale S. A., Brazil
5 shared publications - Guilherme Fabiano Mendonça dos Santos
Universidade Federal do Espírito Santo - Departamento de Engenharia Mecânica
4 shared publications - Matheus Valente Lopes
University of Campinas (Unicamp
4 shared publications - Pedro Henrique Alves Corrêa
Railway Laboratory (Lafer), Universidade Estadual de Campinas (UNICAMP), Campinas, Brazil
4 shared publications - Ícaro Pavani Teodoro
School of Mechanical Engineering - University of Campinas - UNICAMP
4 shared publications
Latest Publications
- 1 December 2025
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 34 (12) , 125001
Optimized piezoelectric device design with analysis of structural variability and reliability
The study of energy harvesting from mechanical vibrations using piezoelectric materials is important due to their high electrical charge density, which make these devices adequate for compact systems. However, since the available energy for conversion is limited, efficient designs are required. Furthermore, device durability remains underexplored despite its critical importance, as vibrations can induce fatigue in piezoelectric sensors and degrade their properties. This work proposes the design of beam-type devices with an integrated piezoelectric patch, simultaneously considering the electrical power generated and the bending stress on the patch as conflicting objectives. Through multi-objective optimization, the design seeks to maximize harvested power and minimize bending stress, while accounting for uncertainties in material parameters to quantify variation in bending stress response. The originality of this work lies in integrating durability into the optimization framework by evaluating the surface stress of the piezoelectric layer with reliability methods (first order reliability method and Monte Carlo simulation) and extending the approach to the design of different resonant devices. The results show that shorter beams generate higher power but higher stress, whereas longer beams reduce stress and variability. A shorter device produced 128.8 mW with 96% probability of failure, while a longer device produced 74.8 mW with 22%, highlighting the trade-off between performance and durability. For a given allowable stress value, substituting a shorter beam device with a longer one tends to significantly reduce the probability of failure, making it more suitable for applications where durability is critical, such as long-term structural health monitoring in bridges or aerospace components.
- 1 December 2025
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 34 (12) , 125001
Optimized piezoelectric device design with analysis of structural variability and reliability
The study of energy harvesting from mechanical vibrations using piezoelectric materials is important due to their high electrical charge density, which make these devices adequate for compact systems. However, since the available energy for conversion is limited, efficient designs are required. Furthermore, device durability remains underexplored despite its critical importance, as vibrations can induce fatigue in piezoelectric sensors and degrade their properties. This work proposes the design of beam-type devices with an integrated piezoelectric patch, simultaneously considering the electrical power generated and the bending stress on the patch as conflicting objectives. Through multi-objective optimization, the design seeks to maximize harvested power and minimize bending stress, while accounting for uncertainties in material parameters to quantify variation in bending stress response. The originality of this work lies in integrating durability into the optimization framework by evaluating the surface stress of the piezoelectric layer with reliability methods (first order reliability method and Monte Carlo simulation) and extending the approach to the design of different resonant devices. The results show that shorter beams generate higher power but higher stress, whereas longer beams reduce stress and variability. A shorter device produced 128.8 mW with 96% probability of failure, while a longer device produced 74.8 mW with 22%, highlighting the trade-off between performance and durability. For a given allowable stress value, substituting a shorter beam device with a longer one tends to significantly reduce the probability of failure, making it more suitable for applications where durability is critical, such as long-term structural health monitoring in bridges or aerospace components.
- 17 August 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
Assessing the effect of modelling approaches for longitudinal train dynamics simulations with a multibody code
Different methods can be used to incorporate longitudinal train dynamics into multibody models, which is crucial for understanding the dynamic behaviour of railway vehicles. The main contribution of the article is to test and compare different strategies under the same simulation scenario, involving a group of four wagons with three-piece bogies. Some strategies are based on data exchange between multibody and longitudinal train dynamics frameworks, while others are purely standalone multibody models, including longitudinal train dynamics states. The study confirms that all strategies can yield similar results, but they differ significantly in computational efficiency. Modelling vehicles as masses with a single degree of freedom within the multibody environment is 6.5 times slower than running a multibody simulation with in-train forces from a preliminary longitudinal train dynamics simulation. On the other hand, co-simulation performs poorly, mainly due to the chosen communication rate between longitudinal train dynamics and multibody codes. When an optimal data exchange rate is selected, computational speeds can decrease by about three orders of magnitude in the reference scenario. A balanced solution can be achieved by modelling wagon sets with large masses inside the multibody framework, reducing the number of degrees of freedom and thus achieving computational speeds comparable to those of the straightforward methods.
- 17 August 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
Assessing the effect of modelling approaches for longitudinal train dynamics simulations with a multibody code
Different methods can be used to incorporate longitudinal train dynamics into multibody models, which is crucial for understanding the dynamic behaviour of railway vehicles. The main contribution of the article is to test and compare different strategies under the same simulation scenario, involving a group of four wagons with three-piece bogies. Some strategies are based on data exchange between multibody and longitudinal train dynamics frameworks, while others are purely standalone multibody models, including longitudinal train dynamics states. The study confirms that all strategies can yield similar results, but they differ significantly in computational efficiency. Modelling vehicles as masses with a single degree of freedom within the multibody environment is 6.5 times slower than running a multibody simulation with in-train forces from a preliminary longitudinal train dynamics simulation. On the other hand, co-simulation performs poorly, mainly due to the chosen communication rate between longitudinal train dynamics and multibody codes. When an optimal data exchange rate is selected, computational speeds can decrease by about three orders of magnitude in the reference scenario. A balanced solution can be achieved by modelling wagon sets with large masses inside the multibody framework, reducing the number of degrees of freedom and thus achieving computational speeds comparable to those of the straightforward methods.
- 19 July 2025
- Published by Springer Nature in International Journal of Mechanics and Materials in Design
- Vol. 21 (6) , 1857-1877
Metamodeling for robust design of energy harvesting devices using multiobjective optimizations
- 19 July 2025
- Published by Springer Nature in International Journal of Mechanics and Materials in Design
- Vol. 21 (6) , 1857-1877
Metamodeling for robust design of energy harvesting devices using multiobjective optimizations
- 25 April 2025
- Published by Elsevier in Computers & Structures
- Vol. 315
Metamodeling for robust design of energy harvesting devices using polynomial chaos expansion and artificial neural networks
- 25 April 2025
- Published by Elsevier in Computers & Structures
- Vol. 315
Metamodeling for robust design of energy harvesting devices using polynomial chaos expansion and artificial neural networks
- 14 February 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 239 (5) , 431-442
Algorithm-based strategy to define an equivalent railway track for wear simulations
Multibody simulations of train dynamics commonly employ generic short tracks to validate and observe the behaviour of wagons in certain conditions. However, for proper wheel wear analysis, the entire railway track should be modelled, increasing computational cost and time to obtain worn profiles and wear parameters. The major novelty of this work is the description of a reproducible algorithm-based methodology to obtain a statistically representative shorter equivalent railway track for wear simulations. The proposed methodology includes combining a real measured track with multibody dynamic simulation. To verify the approach, a case study was conducted on a 505 km-long railway in Brazil. Additionally, two distinct vehicles were employed: a European wagon with a standard gauge and a Brazilian wagon with a meter gauge. The shorter equivalent tracks were compared in terms of worn area and wear depth to the initial track, and the generated tracks were cross-compared between vehicles to verify the robustness of the method. It is observed that wear simulations can be performed more efficiently and effectively, reducing the computational time by at least 94%, while still obtaining accurate results, given that the final equivalent tracks were 18.59 times shorter for the Brazilian model and 22.45 times shorter for the European model comparing to the real track, with the maximum deviation being 6.55% in flange depth and with a maximum root mean-square error (RMSE) of 871 nm.
- 14 February 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 239 (5) , 431-442
Algorithm-based strategy to define an equivalent railway track for wear simulations
Multibody simulations of train dynamics commonly employ generic short tracks to validate and observe the behaviour of wagons in certain conditions. However, for proper wheel wear analysis, the entire railway track should be modelled, increasing computational cost and time to obtain worn profiles and wear parameters. The major novelty of this work is the description of a reproducible algorithm-based methodology to obtain a statistically representative shorter equivalent railway track for wear simulations. The proposed methodology includes combining a real measured track with multibody dynamic simulation. To verify the approach, a case study was conducted on a 505 km-long railway in Brazil. Additionally, two distinct vehicles were employed: a European wagon with a standard gauge and a Brazilian wagon with a meter gauge. The shorter equivalent tracks were compared in terms of worn area and wear depth to the initial track, and the generated tracks were cross-compared between vehicles to verify the robustness of the method. It is observed that wear simulations can be performed more efficiently and effectively, reducing the computational time by at least 94%, while still obtaining accurate results, given that the final equivalent tracks were 18.59 times shorter for the Brazilian model and 22.45 times shorter for the European model comparing to the real track, with the maximum deviation being 6.55% in flange depth and with a maximum root mean-square error (RMSE) of 871 nm.
- 17 December 2024
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 136 (3-4) , 1191-1205
Influence of shielding gas flow rate on residual stresses in GMAW weld beads using LCR waves
- 17 December 2024
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 136 (3-4) , 1191-1205
Influence of shielding gas flow rate on residual stresses in GMAW weld beads using LCR waves
- 27 August 2024
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 46 (9) , 1-15
Influence factors on stress measurements using LCR waves for unidirectional carbon-epoxy composites
- 27 August 2024
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 46 (9) , 1-15
Influence factors on stress measurements using LCR waves for unidirectional carbon-epoxy composites
- 15 July 2024
- Published by Elsevier in NDT & E International
- Vol. 147
Identifying grain size in ASTM A36 steel using ultrasonic backscattered signals and machine learning
- 15 July 2024
- Published by Elsevier in NDT & E International
- Vol. 147
Identifying grain size in ASTM A36 steel using ultrasonic backscattered signals and machine learning
- Open Access
- 10 April 2024
- Published by Taylor & Francis in International Journal of Rail Transportation
- Vol. 13 (2) , 332-351
Multi-objective optimization of electro-pneumatic braking process with fuzzy logic control for heavy haul railway applications
1. Heavy haul railways play a crucial role in developing the economy by offering a reliable and efficient mode of transporting large quantities of heavy and bulk commodities. These railways are the...
- 10 April 2024
- Published by Taylor & Francis in International Journal of Rail Transportation
- Vol. 13 (2) , 332-351
Open AccessMulti-objective optimization of electro-pneumatic braking process with fuzzy logic control for heavy haul railway applications
1. Heavy haul railways play a crucial role in developing the economy by offering a reliable and efficient mode of transporting large quantities of heavy and bulk commodities. These railways are the...
- 8 April 2024
- Published by Springer Nature in Multibody System Dynamics
- Vol. 63 (1-2) , 63-81
Comparison between quasi-static and multibody dynamic simulations for wheel-rail contact analysis
- 8 April 2024
- Published by Springer Nature in Multibody System Dynamics
- Vol. 63 (1-2) , 63-81
Comparison between quasi-static and multibody dynamic simulations for wheel-rail contact analysis