Experimental Determination of Heat Transfer using a Polymer Solution Shower during Induction Hardening*
Authors:
- 1 August 2021
- journal article
- research article
- Published by Walter de Gruyter GmbH in HTM Journal of Heat Treatment and Materials
- Vol. 76 (4) , 249-260
Abstract
Heat treatment simulation of inductive surface hardening of large bearing rings is a challenging multi-physical task. Besides the determination of material and process parameters of induction heating, the quenching process must be modelled to obtain realistic results concerning surface hardening depth as well as information about residual stresses and distortions of the bearing rings. A common method to model quenching processes is to determine heat transfer coefficients for the specific process depending on component surface temperature. This method was used to characterize the shower cooling process using an aqueous polymer solution of a modified polyalkylene glycol (PAG) type. A specifically designed test set-up allowed to determine the heat transfer coefficients for different distances between shower and hot specimen as well as for different impingement angles of the fluid relative to gravitation. Additionally, the calculated heat transfer coefficients were checked and corrected by FEM simulations.Keywords
This publication has 10 references indexed in Scilit:
- Leidenfrost phenomenon during quenching in aqueous solutions: effect of evaporation-induced concentration gradientsSoft Matter, 2020
- Mechanisms and Process Control for Quenching with Aqueous Polymer Solutions∗HTM Journal of Heat Treatment and Materials, 2019
- Evaluation of heat transfer in quenching processes with impinging liquid jetsInternational Journal of Thermal Sciences, 2018
- Quenching of Induction Heated Steel2014
- Investigation of the surface residual stresses in spray cooled induction hardened gearwheelsInternational Journal of Materials Research, 2012
- Determination of heat transfer coefficient during high-speed water quenchingInternational Journal of Microstructure and Materials Properties, 2012
- Induction Hardening of Spur Gearwheels Made from 42CrMo4 Hardening and Tempering Steel by Employing Spray CoolingSteel Research International, 2010
- Quenching Theory and Technology2010
- Beschreibung der Abschreckwirkung flüssiger Abschreckmittel am Beispiel zweier Härteöle (2. Teil)HTM Journal of Heat Treatment and Materials, 1991
- Beschreibung der Abschreckwirkung flüssiger Abschreckmittel am Beispiel zweier Härteöle (1. Teil)HTM Journal of Heat Treatment and Materials, 1991