Dielectric Properties and Optimization of Parameters for Microwave Drying of Petroleum Coke Using Response Surface Methodology
- 16 January 2014
- journal article
- research article
- Published by Taylor & Francis in Drying Technology
- Vol. 32 (3) , 328-338
Abstract
The dielectric properties of petroleum coke at five temperatures between 20 to 100 ∘ C, covering different moisture content levels at 2.45 GHz, were measured using an open-ended coaxial probe dielectric measurement system. The effects of drying temperature, duration of drying, and sample mass on the moisture content and dehydration rate of petroleum coke was assessed utilizing the response surface methodology. The dielectric constant, loss factor, and loss tangent were all found to increase nearly linearly with increase in moisture content. Three predictive empirical models were developed to relate the dielectric constant, loss factor, and loss tangent of petroleum coke as a linear function of moisture content from 3–10%. An increase in temperature between 20 to 100 ∘ C was found to increase the dielectric properties. The penetration depth was observed to increase linearly with decrease in moisture content in the range of 3 to 10%. A predictive empirical model was developed to calculate penetration depth for petroleum coke. Two mathematical models were established and analyzed using RSM to describe the relationship between the microwave drying conditions and the responses, moisture content, and dehydration rate. Statistical analysis with response surface regression showed that microwave drying temperature, duration of drying, and sample mass were significantly related to moisture content and dehydration rate. Based on the RSM analysis, the optimum process conditions were estimated to be a microwave drying temperature of 75 ∘ C, drying duration of 10 sec, and sample mass of 60 g, with the resultant moisture content being 0.34 at a dehydration rate of 2.94 g/min.Keywords
This publication has 33 references indexed in Scilit:
- Preparation of TiCl4 with multistage series combined fluidized bedTransactions of Nonferrous Metals Society of China, 2013
- Microwave drying characteristics and kinetics of ilmeniteTransactions of Nonferrous Metals Society of China, 2011
- Microwaves in extractive metallurgy: Part 1 – Review of fundamentalsMinerals Engineering, 2009
- Optimization of Vegetal Pear Drying Using Response Surface MethodologyDrying Technology, 2008
- Optimization of Rubber Wood Drying by Response Surface Method and Multiple Contour PlotsDrying Technology, 2004
- Drying of silica sludge using microwave heatingApplied Thermal Engineering, 2004
- Physical and dielectric properties of pharmaceutical powdersPowder Technology, 2003
- Processing materials with microwave energyMaterials Science and Engineering: A, 2000
- Process development for treatment of complex perovskite, ilmenite and rutile oresMinerals Engineering, 1999
- Electrical properties of water in clay and silty soilsJournal of Applied Geophysics, 1998