Low-Temperature Fabrication of Millimeter-Scale MEMS-Based Piezoelectric Ultrasonic Energy Harvesters for Medical Implants
- 12 July 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 33 (5) , 524-531
Abstract
MEMS-based piezoelectric ultrasonic energy harvesters (PUEH) have become one of the most promising options for replacing or transferring energy to batteries in medical implants, where device miniaturization and power optimization are needed. Among the most commonly used piezoelectric materials in PUEH, lead zirconate titanate (PZT) is widely acknowledged for its excellent piezoelectric properties, good stability, and low cost. However, the performance of PZT degrades when the processing temperature approaches and exceeds half of its Curie temperature (T $_{\mathrm{c}})$ , limiting its application. Here, we demonstrate a highly miniaturized, low-temperature fabricated MEMS-based PUEH with an effective ultrasound harvesting area of 0.79 mm $^{2}$ and an effective device volume of 0.35 mm $^{3}$ . The low-temperature adhesive epoxy bonding ensures the temperature throughout the entire fabrication process remains below 85 $^{\circ}$ C, which preserves the properties of the integrated piezoelectric material to the greatest extent. This allows the use of bulk PZT-5H, a material that possesses superior piezoelectric properties, but has a relatively low T $_{\mathrm{c,}}$ to enhance device performance. Our device outputs a root-mean-square (RMS) voltage of 0.62 V and an RMS power of 0.19 mW on a 2 k $\Omega $ resistive load at an optimum operating frequency of 200 kHz, with a reception distance of 20 mm in water and input acoustic power intensity of 178 mW/cm $^{2}$ . The proposed design and fabrication technique enable our device to achieve the smallest effective size among the reported MEMS-based PUEH while still being capable of powering up numerous implantable medical devices and being compatible with various commercially available power management units. 2024-0081Keywords
Funding Information
- Swedish Foundation for Strategic Research (RMX18-0066)
This publication has 39 references indexed in Scilit:
- Low-Temperature Integration of Bulk PZT-5H for Enhancing the Performance of MEMS-Based Piezoelectric Ultrasonic Energy Harvesters2024
- Thick films for high-temperature piezoelectric applications - a future referenceJournal of Electroceramics, 2023
- Piezoelectric Materials: Properties, Advancements, and Design Strategies for High-Temperature ApplicationsNanomaterials, 2022
- Ultrasound-induced wireless energy harvesting: From materials strategies to functional applicationsNano Energy, 2020
- Acoustic power transfer for biomedical implants using piezoelectric receivers: effects of misalignment and misorientationJournal of Micromechanics and Microengineering, 2019
- Ultrasound‐Induced Wireless Energy Harvesting for Potential Retinal Electrical Stimulation ApplicationAdvanced Functional Materials, 2019
- A MEMS-Scale Ultrasonic Power Receiver for Biomedical ImplantsIEEE Sensors Letters, 2019
- End-to-End Design of Efficient Ultrasonic Power Links for Scaling Towards Submillimeter Implantable ReceiversIEEE Transactions on Biomedical Circuits and Systems, 2018
- Direct-Current Nanogenerator Driven by Ultrasonic WavesScience, 2007
- Piezoelectric Energy Harvesting with a Clamped Circular Plate: AnalysisJournal of Intelligent Material Systems and Structures, 2005