This study investigates the interaction between carbon black (CB) nanofluids and metallic surfaces, with emphasis on corrosion, nanoparticle deposition, and the potential contribution of erosion under stationary and rotating flow conditions. Aluminum, copper, and iron plates were exposed for 168 h to three aqueous systems: distilled water, tap water, and a 0.020 wt.% CB nanofluid stabilized with sodium dodecyl sulfate (SDS). Mass changes were quantified gravimetrically, while surface morphology and composition were characterized using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The results indicate that material degradation was governed primarily by electrochemical corrosion and surface chemistry rather than mechanical erosion, consistent with the low particle concentration and relatively mild hydrodynamic conditions investigated. Aluminum exhibited negligible corrosion, whereas nanoparticle deposition was strongly influenced by hydrodynamics, with rotation promoting greater and more heterogeneous nanoparticle deposition. Copper showed concurrent nanoparticle deposition and localized corrosion, with SEM revealing surface roughening and early-stage cracking, while supplementary tests suggested that SDS-containing environments may promote corrosion initiation. Iron was the most susceptible material, exhibiting extensive oxide formation and a strong coupling between corrosion processes and nanofluid stability, with the most pronounced destabilization occurring in SDS-stabilized suspensions. These findings emphasize that under the investigated conditions material performance in nanoparticle-containing fluids is governed primarily by the interplay between corrosion processes, surfactant chemistry, nanofluid stability, and flow conditions, rather than by nanoparticle-induced erosion.