Milling force estimation based on harmonic force model and acceleration feedback
Authors:
Open Access
- 9 April 2025
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 137 (11-12) , 5735-5749
Abstract
Monitoring milling forces is crucial as they directly reflect the milling process. Direct force measurement using a dynamometer is challenging for industrial applications. However, indirect force measurement can be achieved with efficient Kalman filter estimation algorithms and low-cost accelerometers that can be conveniently installed in machine tools. Existing research establishes the force-acceleration relationship through modal analysis of the frequency response function (FRF). High-order system models for acceleration response not only increase computational effort but also introduce tuning issues for the estimator. This paper introduces a novel and simple Kalman filter system model. In this approach, the cutting force coefficients are treated as unknown state variables, resulting in a $$4 \times 4$$ identity state transition matrix. The acceleration measurement is related to the estimated coefficient states by modeling the milling forces as a sum of tooth passing frequency harmonics. First, an analytical derivation of the force harmonics in the angular domain is presented. Then, utilizing the FRF gains and phases at the tooth passing frequency harmonics, the acceleration is expressed in terms of coefficient state variables and integrated into the output matrix of the Kalman filter. By updating the output matrix with the measured angular position of the tool, a linear time-varying system model of the cutting process is achieved. The proposed method is validated through real cutting tests conducted under various process parameters. Comparison with dynamometer measurements shows that the milling force can be estimated with an average RMS error of around 5%
Keywords
Funding Information
- Orta Doğu Teknik Üniversitesi (ADEP-302-2023-11219)
This publication has 20 references indexed in Scilit:
- Digital twin assisted intelligent machining process monitoring and controlCIRP Journal of Manufacturing Science and Technology, 2024
- Monitoring method of cutting forces and vibrations by using frequency separation of acceleration sensor signals during milling process with small ball end millsPrecision Engineering, 2023
- Online identification of milling forces using acceleration signalsThe International Journal of Advanced Manufacturing Technology, 2023
- Online identification of mechanistic milling force modelsMechanical Systems and Signal Processing, 2021
- Prediction of cutting force in milling process using vibration signals of machine toolThe International Journal of Advanced Manufacturing Technology, 2018
- Identification of cutting force coefficients in machining process considering cutter vibrationMechanical Systems and Signal Processing, 2018
- Milling force identification from acceleration signals using regularization method based on TSVD in peripheral millingProcedia CIRP, 2018
- Model-based broadband estimation of cutting forces and tool vibration in milling through in-process indirect multiple-sensors measurementsThe International Journal of Advanced Manufacturing Technology, 2015
- Manufacturing Automation2012
- Indirect cutting force measurement in the micro end-milling process based on frequency analysis of sensor signalsJournal of Mechanical Science and Technology, 2010