HÇHakan Çalışkan

Hakan Çalışkan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hakan Çalışkan has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Milling force estimation based on harmonic force model and acceleration feedback

    by Mert İlMe, Hakan Çalışkan, Orkun Özşahin

    Monitoring milling forces is crucial as they directly reflect the milling process. Direct force measurement using a dynamometer is challenging for industrial applications. However, indirect force measurement can be achieved with efficient Kalman filter estimation algorithms and low-cost accelerometers that can be conveniently installed in machine tools. Existing research establishes the force-acceleration relationship through modal analysis of the frequency response function (FRF). High-order system models for acceleration response not only increase computational effort but also introduce tuning issues for the estimator. This paper introduces a novel and simple Kalman filter system model. In this approach, the cutting force coefficients are treated as unknown state variables, resulting in a $$4 \times 4$$ 4 × 4 identity state transition matrix. The acceleration measurement is related to the estimated coefficient states by modeling the milling forces as a sum of tooth passing frequency harmonics. First, an analytical derivation of the force harmonics in the angular domain is presented. Then, utilizing the FRF gains and phases at the tooth passing frequency harmonics, the acceleration is expressed in terms of coefficient state variables and integrated into the output matrix of the Kalman filter. By updating the output matrix with the measured angular position of the tool, a linear time-varying system model of the cutting process is achieved. The proposed method is validated through real cutting tests conducted under various process parameters. Comparison with dynamometer measurements shows that the milling force can be estimated with an average RMS error of around 5%


  • Open Access

    Real-Time Milling Chatter Detection and Control with Axis Encoder Feedback and Spindle Speed Manipulation

    by Hakan Çalışkan

    This paper introduces a complete real-time algorithm, where the chatter is detected and eliminated by spindle speed manipulation via the chatter energy feedback calculated from the axis encoder measurement. The proposed method does not require profound knowledge of the machining dynamics; instead, the entire algorithm exploits the fact that milling vibrations consist of forced vibrations at spindle speed harmonics and chatter vibrations that are close to one of the natural modes, with sidebands which are spread at the multiples of spindle speed frequency above and below the chatter frequency. The developed algorithm is able to identify the amplitude, phase and frequency of all the harmonics constituting the periodic forced and chatter vibrations. The key challenge is to select dominant chatter frequencies for the calculation of a robust and accurate chatter energy ratio feedback; this is achieved by utilizing the frequency estimation variance of EKF as a novel chatter indicator. Based on the chatter energy ratio feedback, the controller overrides the spindle speed in order to suppress the chatter energy below a particular threshold value. The varying spindle speed challenge is handled by updating the state transition matrices of the Kalman filters and real-time calculation of the band-pass filter coefficients, based on the derived discrete time transfer functions. The developed algorithm is tested on a Deckel FP5cc CNC which is in-house retrofitted and has a PC-based controller for the real-time application of the proposed algorithm. It is shown that the real-time chatter frequency and amplitude estimates are compatible with off-line FFT analysis, and chatter can be successfully eliminated by energy feedback.


  • Open Access

    Frezeleme işleminde CNC tabla titreşimlerinin kestirimi için dinamik simülasyon modeli geliştirilmesi

    by Barış Altun, Hakan Çalışkan, Orkun Özşahi̇n

    Endüstri 4.0 başlığı altında gözlemlenen gelişmeler üretim frezeleme sürecinde veri toplama ve analizi uygulamalarını mümkün kılmıştır. Bu çalışmaların uygulanabilmesi için yazılımların geliştirilmesi gerekmektedir ve bu yazılımların geliştirilmesi için test yapılması masraflı ve zahmetlidir. Bu çalışmada frezeleme işleminin dinamik modellenmesi Matlab Simulink ortamında gerçekleştirilmiştir. Frezeleme sürecinin dinamiğini açıklamak adına literatür dikkatli bir şekilde taranarak amaca uygun modeller, hesaplamalar seçilmiş ve kapalı çevrim takım parça titreşim modeliyle birleştirilmiştir. Kuvvet modeli olarak doğrusal kuvvet modeli ve Martellotti talaş kalınlığı seçilmiş ve sistem referansı olarak deney yapılacak olan freze tezgahında çekiç testleriyle elde edilen FTF’lerin modal analizi kullanılıp transfer fonksiyonları elde edilmiştir. Parça malzemesi olarak AL7075 seçilmiştir ve kuvvet katsayıları deneysel olarak başka bir çalışmada bulunmuştur. Kesim testi yapılmış ve ivmeler ölçülüp aynı kesim parametreleri ile yapılan simülasyonla karşılaştırılmış ve model doğrulanmıştır. Geliştirilen model ivmelerin genliklerini doğru tahmin etmektedir.

  • Optimal Design of an In-flight Refueling Door Mechanism

    by Hasan Akman, Ali Emre Turgut, Hakan Çalişkan

    In this study, the preliminary design of an in-flight refueling door mechanism is performed. A systematic design methodology is introduced and used in the design of the refueling door mechanism. The design is divided into two sub-functions: door opening and actuation. Nine different mechanism concepts are created for the door opening function and eight different concepts are created for the actuation function. Pugh decision matrix method is used to evaluate and select the most feasible options. Six experienced engineers scored the option set, resultantly two concepts for the door opening and three concepts for the actuation sub-function are selected. Kinematic synthesis of these concepts is performed and used to determine the upper and lower bounds during optimization. Kinematic and force analysis of the concepts are performed and utilized for the constraints and cost function calculations of the optimization algorithm. Multi-objective Genetic Algorithm optimization technique is used to optimize the parameters of the selected mechanisms. The best mechanism for each sub-function is selected and combined to reach the final design. It was shown that through optimization, the required input torque decreased approximately 20% for the door opening mechanism and the required input force decreased approximately 42% for the actuation mechanism when compared to the graphical synthesis results.


  • Open Access

    A Model - Based Jamming Detection Method for Electro-Hydrostatic Actuators

    by Emre Murat Poyraz, Hakan Caliskan, Ali Emre Turgut

    An anomaly or a fault, which may be treated as insignificant in a complicated engineering system, like an electro–hydraulic flight control actuator, can cause considerable performance degradation and deteriorating effects or even worse it may end up with a catastrophic system failure. One of the problems commonly observed in air vehicles is called jamming. Jamming is the type of failure where an actuator connected to a flight control surface permanently gets stuck at a certain position and does not move anymore. This might cause a loss of control of the air vehicle causing severe consequences. Although, there are several methods to detect jamming in the literature, still there is not a universally accepted solution. In this paper, a novel threshold-based fault detection and diagnosis method is proposed. The method is based on the variance of time rate of change of disturbance load and the average tracking error. When these two quantities are above a certain corresponding threshold, jamming is detected. The method is tested on an experimental setup. The experiments show that the detection performance of the method is satisfactory and the detection is performed under one second for all the test cases. Keywords: Fault detection and diagnosis; Disturbance observer; EHA; Jamming; Flight control actuation. DOI: 10.17350/HJSE19030000188 Full Text:

  • On-Line Energy-Based Milling Chatter Detection

    by Hakan Caliskan, Zekai Murat Kilic, Yusuf Altintas

    Milling exhibits forced vibrations at tooth passing frequency and its harmonics, as well as chatter vibrations close to one of the natural modes. In addition, there are sidebands, which are spread at the multiples of tooth passing frequency above and below the chatter frequency, and make the robust chatter detection difficult. This paper presents a novel on-line chatter detection method by monitoring the vibration energy. Forced vibrations are removed from the measurements in discrete time domain using a Kalman filter. After removing all periodic components, the amplitude and frequency of chatter are searched in between the two consecutive tooth passing frequency harmonics using a nonlinear energy operator (NEO). When the energy of any chatter component grows relative to the energy of forced vibrations, the presence of chatter is detected. The proposed method works in discrete real time intervals, and can detect the chatter earlier than frequency domain-based methods, which rely on fast Fourier Transforms. The method has been experimentally validated in several milling tests using both microphone and accelerometer measurements, as well as using spindle speed and current signals.