Nanocrystalline Lanthanum Oxide Layers on Tubes Synthesized Using the Metalorganic Chemical Vapor Deposition Technique
Author:
Open Access
- 13 November 2024
- Vol. 17 (22) , 5539
Abstract
Lanthanum oxide (La2O3) layers are widely used in electronics, optics, and optoelectronics due to their properties. Lanthanum oxide is also used as a dopant, modifying and improving the properties of other materials in the form of layers, as well as having a large volume. In this work, lanthanum oxide layers were obtained using MOCVD (Metalorganic Chemical Vapor Deposition) on the inner walls of tubular substrates at 600–750 °C. The basic reactant was La(tmhd)3 (tris(2,2,6,6-tetramethyl-3,5-heptanedionato)lanthanum(III)). The evaporation temperature of La(tmhd)3 amounted to 170–200 °C. Pure argon (99.9999%) and air were used as the carrier gases. The air was also intended to remove the carbon from the synthesized layers. Tubes of quartz glass were used as the substrates. La2O3 layers were found to be growing on their inner surfaces. The value of the extended Grx/Rex2 criterion, where Gr—Grashof’s number, Re—Reynolds’ number, x—the distance from the gas inflow point, was below 0.01. The microstructure of the deposited layers of lanthanum oxide was investigated using an electron scanning microscope (SEM). Their chemical composition was analyzed via energy-dispersive X-ray (EDS) analysis. Their phase composition was tested via X-ray diffraction. The transmittance of the layers of lanthanum oxide was determined with the use of UV-Vis spectroscopy. The obtained layers of lanthanum oxide were characterized by a nanocrystalline microstructure and stable cubic structure. They also exhibited good transparency in both ultraviolet (UV) and visible (Vis) light.Keywords
This publication has 72 references indexed in Scilit:
- Investigation of PEALD ZrO2/La2O3-based high-k nanolaminates sandwiched between Al and Ti electrodes for MIM capacitorsJournal of Materials Science: Materials in Electronics, 2023
- Study on the promotional effect of lanthana addition on the performance of hydroxyapatite-supported Ni catalysts for the CO2 methanation reactionApplied Catalysis B: Environment and Energy, 2022
- The effect of post-deposition annealing on the chemical, structural and electrical properties of Al/ZrO2/La2O3/ZrO2/Al high-k nanolaminated MIM capacitorsJournal of Materials Science: Materials in Electronics, 2022
- Hydrogen barrier performance of sputtered La2O3 films for InGaZnO thin-film transistorJournal of Materials Science, 2019
- Preparation and properties of lanthanum (La) and indium (In) co-doped ceria system for IT-SOFCIonics, 2018
- Tailoring of Functionally Graded Mullite: La2O3 Coatings by Transferred Arc Plasma for Thermal Barrier CoatingsJournal of Inorganic and Organometallic Polymers and Materials, 2018
- Models of the processes at the substrate surface in the CVD methodCeramics International, 1991
- Preparations and characterization of lanthana catalysts: study of their activity in CO/H2 reactionsJournal of Materials Science, 1989
- Thin CVD layers of carbon-doped silicon nitride on quartz glassCeramics International, 1989
- The preparation, characterization and applications of silicon nitride thin filmsThin Solid Films, 1980