Effect of boron nitride nanoplatelet loading on the thermomechanical performance, thermal stability and X-band electromagnetic interference shielding of carbon-fiber/epoxy laminates
- 26 October 2026
- journal article
- Published by Walter de Gruyter GmbH in Materials Testing
Abstract
Woven carbon-fiber/epoxy laminates containing 0, 0.5, and 2 wt.% boron nitride nanoplatelets (BNNPs), relative to the epoxy resin mass, were fabricated using the same processing route. Their thermomechanical behavior, thermal stability, and X-band electromagnetic interference (EMI) shielding were evaluated using dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and shielding effectiveness (SE) measurements over 8–12 GHz. At 0.5 wt.% BNNP, the glassy storage modulus ( E ′) increased from 9.3 to 11.2 GPa, and the rubbery plateau modulus increased from 0.33 to 2.1 GPa. The loss factor (tan δ) peak temperature shifted from 95.84 to 105.23 °C, while the temperature at 5 % mass loss (Td5) increased from 305.95 to 314.04 °C. The residual mass at 900 °C increased from 68.53 % for the neat laminate to 72.38–72.93 % for the BNNP-containing laminates. The band-averaged total SE values were approximately 50, 46, and 43 dB for the laminates containing 0, 0.5, and 2 wt.% BNNP, respectively. Although the SE curves crossed at several frequencies, the band-averaged values decreased with increasing BNNP content. Among the formulations tested, the 0.5 wt.% BNNP laminate showed the most favorable thermomechanical response, with a reduction in band-averaged EMI shielding relative to the neat laminate.Keywords
This publication has 41 references indexed in Scilit:
- Functionally Graded Nanofiber Interlayers for Hydrothermally Aged Glass/Epoxy Laminates: Mechanical Performance and Electromagnetic AttenuationPolymer Composites, 2026
- Recycled Polyacrylonitrile Nanofiber Interleaves With Graphene Nanoplatelets for Adhesively Bonded Composite Joints: Lap‐Shear and Opening‐Mode Fracture PerformancePolymer Composites, 2026
- Coupled Dimensional Energy Balance and Machine Learning Validation for Ballistic Response Prediction of Fiber CompositesFibers and Polymers, 2025
- Gamma‐ray and neutron attenuation of carbon fiber/epoxy composites with carbon nanotubes and boron nitride nanoparticles for passive shielding applications in spacePolymer Composites, 2024
- Effects of UV-C exposure on composite materials made of recycled carbon fibersActa Astronautica, 2024
- Physical and mechanical properties of graphene and h‐Boron nitride reinforced hybrid aerospace grade epoxy nanocompositesJournal of Applied Polymer Science, 2023
- Outgassing effect in polymeric composites exposed to space environment thermal-vacuum conditionsActa Astronautica, 2020
- Novel dielectric BN/epoxy nanocomposites with enhanced heat dissipation performance for electronic packagingComposites Part A: Applied Science and Manufacturing, 2018
- Boron nitride-MWCNT/epoxy hybrid nanocomposites: Preparation and mechanical propertiesApplied Surface Science, 2014
- Electromagnetic interference shielding of graphene/epoxy compositesCarbon, 2009