EFFECT OF STAINLESS STEEL 304 TIG WELDING AMPERE ON STRESS CORROSION CRACKING PHENOMENON
Open Access
- 27 July 2023
- journal article
- research article
- Published by Universitas Muhammadiyah Surakarta in Media Mesin: Majalah Teknik Mesin
- Vol. 24 (2) , 96-101
Abstract
This article discusses the experimental results of stress corrosion cracking grade 304 stainless steel after GTAW welding under environmental corrosion simulation. The corrosion phenomenon that occurs is Stress Corrosion Cracking (SCC). The experimental method is a specimen welded using a current of 55, 60, and 65 Ampere respectively with a gas flow rate of 5 L/min argon shielding gas. The constant tensile loads of 2000 N and 4000 N in the state of the test object immersed for 2 x 24 hours in a solution of HCl + Aquades. Different Ampere and shielding gas flow rate parameters affected the cracks phenomenon. Vickers Hardness and Microstructure were used to evaluate the weld area. The lowest ampere of the weld results in maximum rough cracks from the surface and it's visible on the surface. The increased hardness of the 55 Ampere current specimen indicates a change in structure or phase after welding. The highest ampere produces fine cracks on all surfaces.Keywords
This publication has 13 references indexed in Scilit:
- Pitting corrosion of 2Cr13 stainless steel in deep-sea environmentJournal of Materials Science & Technology, 2021
- Evaluation of pitting corrosion in duplex stainless steel Fe20Cr9Ni for nuclear power applicationActa Materialia, 2020
- A parametric study on effects of pitting corrosion on steel plate's ultimate strengthApplied Ocean Research, 2020
- Effect of gas tungsten arc welding parameters on the corrosion resistance and the residual stress of heat affected zoneEngineering Failure Analysis, 2020
- Effect of microstructural aspects in the heat-affected zone of high strength pipeline steels on the stress corrosion cracking mechanism: Part I. In acidic soil environmentCorrosion Science, 2019
- Welding penetration prediction with passive vision systemJournal of Manufacturing Processes, 2018
- Evaluation of inter-granular corrosion susceptibility in 316LN austenitic stainless steel weldmentsFusion Engineering and Design, 2018
- Corrosion of Stainless Steels☆2017
- Stress corrosion cracking in the heat affected zone of a stainless steel 308L-316L weld joint in primary waterCorrosion Science, 2016
- Stress corrosion cracking in the heat-affected zone of A508 steel welds under high-temperature waterJournal of Nuclear Materials, 2011