Formation of Composite SiC/SiC Joints by Embedded Wire Chemical Vapor Deposition
- 16 September 2025
- journal article
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (21)
Abstract
The joining of ceramic monoliths or composites to date has primarily been limited to the formation of brittle monolithic joints using heterogeneous (dissimilar) materials, similar to brazing in metals. The development of a damage‐tolerant joint layer by SiC fiber reinforcements is demonstrated here. Tube workpieces made of SiC fiber‐SiC matrix composite are joined using a nonwoven SiC fiber mat densified by embedded wire chemical vapor deposition (EWCVD), creating a fiber‐reinforced weld‐like joint by homogeneous joining. EWCVD uses a localized heating method to target deposition and growth to the joint region specifically, while minimizing thermal damage to the surrounding composite tube material. X‐ray computed tomography (XCT) is used to nondestructively characterize as‐made joints for relative density, adhesion, and composition. In situ XCT analysis during mechanical testing revealed crack deflections in the bonding layer, which indicates a toughening mechanism typical of ceramic matrix composite phase. Gas permeation testing of these proof‐of‐concept composite joints identified relatively high leak rates in comparison to fully coated SiC/SiC composite tube workpieces. The novelty of the composite joining method and current technology challenges, including gas permeability, are discussed in comparison with traditional ceramic joints and materials.Keywords
Funding Information
- Fusion Energy Sciences
This publication has 26 references indexed in Scilit:
- Damage progression and failure of SiC/SiC composite tubes under hard-contact radial expansionComposites Part B: Engineering, 2025
- The effect of SiCW on the bonding performance of powder/whisker hybrid phenolic adhesive for joining Al2O3 ceramics at different temperature regions (RT-1400 °C)Ceramics International, 2025
- Pressureless joining of SiC ceramic in oxidizing atmosphere using a SiC nanowires reinforced composite adhesiveCeramics International, 2024
- The effect of steel fiber aspect-ratio and content on the fresh, flexural, and mechanical performance of concrete made with recycled fine aggregateConstruction and Building Materials, 2023
- Progress in development of SiC-based joints resistant to neutron irradiationJournal of the European Ceramic Society, 2020
- Joining of β-SiC by spark plasma sinteringJournal of the European Ceramic Society, 2014
- Radiation-tolerant joining technologies for silicon carbide ceramics and compositesJournal of Nuclear Materials, 2014
- Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation resultsJournal of the European Ceramic Society, 2013
- Joining of SiC-based materials for nuclear energy applicationsJournal of Nuclear Materials, 2011
- Chemical Vapor Infiltrated SiC/SiC Composites (CVI SiC/SiC)2005