Tensile and impact properties of cost‐effective hybrid fiber metal laminate sandwich structures
Authors:
- Sivakumar Dhar MalingamSMSivakumar Dhar Malingam
- Lin Feng NgLin Feng Ng
- Kathiravan SubramaniamKSKathiravan Subramaniam
- Ab GhaniAGAb Ghani
- Ahmad FuadAFAhmad Fuad
- 13 November 2017
- journal article
- research article
- Published by Wiley in Advances in Polymer Technology
- Vol. 37 (7) , 2385-2393
Abstract
Hybrid composite materials, which combine two or more types of fiber in a single matrix, have currently drawn the interest of researchers. This research investigates the tensile and impact properties of hybrid kenaf/glass reinforced metal laminates (FMLs) with different fiber orientations and stacking configurations. FMLs were formed by sandwiching the annealed aluminum 5052 sheets to the composite laminates using hot press molding compression technique. The tensile test was performed at a quasi‐static rate of 2 mm/min with reference to ASTM E8 whereas Charpy impact test was conducted using impact pendulum tester according to ASTM E23. Results showed that improvement in tensile and impact strength was observed in hybrid FMLs compared to kenaf fiber reinforced FMLs. Fiber orientation of ±45° reduced the tensile strength but increased the impact strength of FMLs in comparison with fiber orientation of 0°/90°. Overall, hybrid FMLs incorporated with a fiber stacking sequence of glass/kenaf/glass showed superior characteristic in tensile and impact performance.Keywords
This publication has 29 references indexed in Scilit:
- A review on mechanical behavior of natural fiber based hybrid compositesJournal of Reinforced Plastics and Composites, 2012
- Impact and fatigue properties of hemp–glass fiber hybrid biocompositesJournal of Reinforced Plastics and Composites, 2011
- A review: Fibre metal laminates, background, bonding types and applied test methodsMaterials & Design (1980-2015), 2011
- The fracture properties of environmental-friendly fiber metal laminatesJournal of Reinforced Plastics and Composites, 2011
- Impact behavior of short and continuous fiber-reinforced polyester compositesJournal of Reinforced Plastics and Composites, 2010
- Biodegradable composites based on lignocellulosic fibers—An overviewProgress in Polymer Science, 2009
- Mechanical Performance of Short Banana/Sisal Hybrid Fiber Reinforced Polyester CompositesJournal of Reinforced Plastics and Composites, 2009
- Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester compositesComposites Science and Technology, 2007
- Mechanical behavior of lightweight thermoplastic fiber–metal laminatesJournal of Materials Processing Technology, 2007
- Dissimilar material laser welding between magnesium alloy AZ31B and aluminum alloy A5052-OScience and Technology of Advanced Materials, 2005