Theoretical Analysis and Optimal Design of Underwater Towed Body Dynamic Stability
Open Access
- 22 July 2026
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (14) , 1342
Abstract
This study presents the analysis of towed stability and the optimization design method for an underwater towed body, aiming to design a towing system with high stability, good hydrodynamic performance and a high degree of safety and reliability. By proposing analytical models for both the static and dynamic behavior of the towing system, the influence of the structural characteristics on the motion of the towed body were determined. The Computational Fluid Dynamics (CFD) method was employed to conduct hydrodynamic numerical simulations of the towed body, obtaining precise hydrodynamic coefficients. The optimization design of the towed body’s center of gravity and cable connecting point position was carried out. The simulation results systematically revealed the influence of towing speed and cable length on the dynamic behavior of the towed body. With the speed increasing from 4 kN to 20 kN the depth of the towed body reduces from 277.0 m to 90.6 m, the tension of the cable inreases from 11.5 kN to 171.85 kN. At a towing speed of 20 kN, the optimized towed body stay at an averaged pitch angle of with very small roll angles. This research provides theoretical and numerical analyzing approach for the design of high-performance underwater towed bodies.
Keywords
This publication has 21 references indexed in Scilit:
- Trajectory tracking control for autonomous underwater vehicles based on dual closed-loop of MPC with uncertain dynamicsOcean Engineering, 2022
- Numerical investigation on underwater towed system dynamics using a novel hydrodynamic modelOcean Engineering, 2022
- Imaging shallow gas migration pathways in a mud‐volcano province using an autonomous underwater vehicle (Malta Plateau, Mediterranean Sea)Near Surface Geophysics, 2018
- Gradient-based multidisciplinary design optimization of an autonomous underwater vehicleApplied Ocean Research, 2018
- A new approach in system and tactic design optimization of an autonomous underwater vehicle by using Multidisciplinary Design OptimizationOcean Engineering, 2018
- Robust dynamics calculation for underwater Moving Slender Bodies via Flexible Segment Model based optimizationOcean Engineering, 2015
- Nonlinear adaptive control of an underwater towed vehicleOcean Engineering, 2010
- The cable geometry for a towed submersibleInternational Journal of Mechanical Sciences, 1995
- Dynamic analysis of three-dimensional marine cablesOcean Engineering, 1994
- Numerical simulation of undersea cable dynamicsOcean Engineering, 1983