Tribological Behavior of Al/Nanomagnesium/Aluminum Nitride Composite Synthesized through Liquid Metallurgy Technique
Open Access
- 1 January 2022
- journal article
- research article
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
Abstract
Despite its excellent qualities such as hardness, tensile, and yield strength, aluminum alloys are mostly used in aviation fins and car frames. However, wear resistance at maximum load is weak. This effort will now synthesize and investigate the tribological behavior of AA6063‐ (AlMg0.7Si‐) AlN composites. The goal of this experiment is to determine the best wear rate and coefficient of friction for the AA6063‐AlN with nanomagnesium composites developed. Weight percent, load (L), sliding velocity (SV), and sliding distance (SD) are the process factors studied, and the output responses are wear rate and friction coefficient. Bottom pouring type stir casting was used to create AA6063‐AlN composites with various weight percentages. The various compositions are AA6063, AA6063‐4 wt% AlN, AA6063‐8 wt% AlN, and AA6063‐12 wt% AlN. A pin‐on‐disc machine inspected the wear rate and friction coefficient of AA6063‐AlN composites. Experimentation was done according to L16 orthogonal array (OA). Wear rate (WR) and coefficient of friction (COF) examinations were made to identify the optimum parameters to obtain minimum WR and COF for the AA6063‐AlN composite via grey relational analysis (GRA). The contour plot analysis clear displays WR and COF with respect to wt% vs. L, wt% vs. SV and wt% vs. SD. The ANOVA outcomes revealed that wt% is the most vital parameter (85.55%) persuading WR and COF. The optimized parameters to achieve minor WR and COF was found as 12 wt% of AlN, L 20 N, SV 3 m/s, and SD 400 m. The worn surface was analyzed using scanning electron microscope and indicates that addition of AlN particles with matrix reduces the scratches. These articles offer a key for optimum parameters on wear rate and COF of AA6063‐AlN composites via Taguchi grey relational analysis.Keywords
Funding Information
- Taif University (TURSP-2020/91)
This publication has 31 references indexed in Scilit:
- Effect of Magnesium Addition on Processing the Al-0.8 Mg-0.7 Si/SiCp Metal Matrix CompositesApplied Mechanics and Materials, 2015
- Metallurgical and mechanical characterization of stir cast AA6061-T6–AlNp compositeMaterials & Design (1980-2015), 2012
- In situ fabrication and mechanical properties of Al–AlN composite by hot extrusion of partially nitrided AA6061 powderJournal of Materials Research, 2011
- AlN nanoparticle-reinforced nanocrystalline Al matrix composites: Fabrication and mechanical propertiesMaterials Science and Engineering: A, 2009
- Influence of stirring speed and stirring time on distribution of particles in cast metal matrix compositeJournal of Materials Processing Technology, 2006
- Evaluation of dry sliding wear behavior of silicon particles reinforced aluminum matrix compositesMaterials & Design (1980-2015), 2005
- Effects of thermal cycling on mechanical properties of AlNp/Al compositeMaterials Letters, 2004
- Property characteristics of a AlNp/Al composite fabricated by squeeze casting technologyMaterials Letters, 2003
- The influence of interfacial characteristics between SiCp and Mg/Al metal matrix on wear, coefficient of friction and microhardnessWear, 2001
- Metal matrix composites: production by the stir casting methodJournal of Materials Processing Technology, 1999