Influence of Polyethylene Glycol and Methanol Additions on the Mechanical Alloying Behavior of Cu-4B4C Composite Powder
Author:
Open Access
- 16 July 2024
- journal article
- Published by Iskender AKKURT in International Journal of Computational and Experimental Science and Engineering
- Vol. 10 (3)
Abstract
This study investigated the effect of different process control agent (PCA) usage on mechanical alloying behavior of boron carbide (B4C) reinforced copper (Cu) based composite powder. For this purpose, elemental Cu and B4C powders were weighed and powder specimens were prepared with respect to appropriate mass ratios (96% Cu and 4% B4C). Two different PCA additives, namely polyethylene glycol (PEG) and methanol, were also used to prepare powder samples. The amount of PCA was kept constant at 5wt.% for both specimen. These prepared powder samples were then milled using a planetary type ball-mill. After specified milling periods, milling runs were interrupted and powder samples were extracted from the milling vials for further powder characterization including powder morphology using scanning electron microscopy (SEM) and average particle size (APS) via laser diffraction analysis (Mastersizer). Accordingly, after the completion of milling runs, namely 15 hours of ball-milling, methanol addition was found much more effective at reducing particle sizes than PEG. Final APS values for powder specimens having PEG and methanol as PCAs were determined to be 8.237 and 4.101 microns, respectively.Keywords
This publication has 41 references indexed in Scilit:
- Simultaneously enhanced mechanical and electrical performance of Cu-10wt.%Mo contact material by the addition of graphiteDiamond and Related Materials, 2023
- Nano-Y2O3 effects on the electrical contact properties of Al2O3-Cu/35Cr3TiB2 compositesMaterials Characterization, 2023
- State of the art and prospects in sliver- and copper-matrix composite electrical contact materialsMaterials Today Communications, 2023
- An investigation on gamma-ray and neutron attenuation properties of multi-layered Al/B4C compositeMaterials Today Communications, 2023
- A new TiBN conductive ceramic powder and its application in copper-based electrical contact materialsCeramics International, 2023
- Mechanical and electrical properties of Cu30Cr0.2Zr composites enhanced by CeO2/GOJournal of Alloys and Compounds, 2022
- Nanostructured Materials and Nanocomposites by Mechanical Alloying: An OverviewMetals and Materials International, 2021
- The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless platingAdvanced Powder Technology, 2021
- Microstructure and wear characterization of Al2O3 reinforced silver coated copper matrix composites by electroless plating and hot pressing methodsMaterials Today Communications, 2021
- Arc-Erosion Behavior of Boric Oxide-Reinforced Silver-Based Electrical Contact Materials Produced by Mechanical AlloyingJournal of Electronic Materials, 2014