New Curvature-Compensation Technique for CMOS Bandgap Reference With Sub-1-V Operation
Authors:
- J.-S. ChenJCJ.-S. Chen
- 28 August 2006
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing
- Vol. 53 (8) , 667-671
Abstract
A new sub-1-V curvature-compensated CMOS bandgap reference, which utilizes the temperature-dependent currents generated from the parasitic n-p-n and p-n-p bipolar junction transistor devices in the CMOS process, is presented. The new proposed sub-1-V curvature-compensated CMOS bandgap reference has been successfully verified in a standard 0.25-mum CMOS process. The experimental results have confirmed that, with the minimum supply voltage of 0.9 V, the output reference voltage at 536 mV has a temperature coefficient of 19.5 ppm/degC from 0 degC to 100 degC. With a 0.9-V supply voltage, the measured power noise rejection ratio is -25.5 dB at 10 kHzKeywords
This publication has 15 references indexed in Scilit:
- New Curvature-Compensation Technique for CMOS Bandgap Reference with Sub-1-V Operation2005
- A 2-V 23-μA 5.3-ppm/°C curvature-compensated CMOS bandgap voltage referenceIEEE Journal of Solid-State Circuits, 2003
- A low-voltage low-power voltage reference based on subthreshold MOSFETsIEEE Journal of Solid-State Circuits, 2003
- Curvature-compensated BiCMOS bandgap with 1-V supply voltageIEEE Journal of Solid-State Circuits, 2001
- A CMOS bandgap reference circuit with sub-1-V operationIEEE Journal of Solid-State Circuits, 1999
- A 1.1-V current-mode and piecewise-linear curvature-corrected bandgap referenceIEEE Journal of Solid-State Circuits, 1998
- A DSP-based hearing instrument ICIEEE Journal of Solid-State Circuits, 1997
- A low supply voltage high PSRR voltage reference in CMOS processIEEE Journal of Solid-State Circuits, 1995
- Exponential curvature-compensated BiCMOS bandgap referencesIEEE Journal of Solid-State Circuits, 1994
- A curvature-corrected low-voltage bandgap referenceIEEE Journal of Solid-State Circuits, 1993