Selective laser melting of CoCrMo-Ti6Al4V bimetallic composites: fabrication, characterization, and cytocompatibility
- 1 August 2026
- journal article
- Published by IOP Publishing in Biomedical Materials
- Vol. 21 (4) , 045027
Abstract
Bimetallic structures integrating Ti6Al4V and CoCrMo alloys present a promising strategy for advanced orthopedic implants by synergistically combining high fracture toughness with excellent wear resistance. However, the direct fabrication of these dissimilar metals via selective laser melting (SLM) is significantly hindered by metallurgical incompatibility and high residual stress, which frequently lead to interfacial delamination and edge warping. In this study, a CoCrMo-Ti6Al4V bimetallic composite was successfully fabricated using SLM. To overcome manufacturing defects, a CoCrMo transition layer printed with low laser energy density was employed as a mechanical buffer to mitigate residual stresses, while optimized external support structures provided physical anchoring to suppress geometric distortion. The microstructural evolution, elemental distribution, and phase composition were systematically characterized using field-emission scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffraction. Mechanical performance was evaluated through hardness and sliding wear tests, while the biological response was assessed using human bone marrow mesenchymal stem cells (BMSCs). The results demonstrated that the three-layer architecture effectively eliminated macroscopic defects and ensured structural integrity. Furthermore, the composite exhibited a substantial enhancement in surface hardness and wear resistance, achieving an interfacial bonding strength of 43.21 ± 1.07 MPa. Fracture analysis revealed a cohesive failure mode within the transition layer, indicating robust metallurgical bonding between the dissimilar components. In vitro assessments confirmed excellent cytocompatibility, exhibiting high cell viability (>95%) and proliferation on the composite surfaces. Ultimately, this research establishes a reliable fabrication methodology for complex bimetallic components, offering broad application prospects in personalized medical devices, joint replacements, and tissue engineering.Keywords
This publication has 44 references indexed in Scilit:
- Microstructural and Thermal Analysis of Plasma-Sprayed Alumina Coating on SLM-Fabricated Titanium Grade 2 AlloyJournal of Materials Engineering and Performance, 2025
- Microstructural and Corrosion Behavior of Plasma-Sprayed Stellite 6-Coated Selective Laser Melting-Fabricated Inconel 625Journal of Materials Engineering and Performance, 2025
- Effect of Friction on Finite Element Contact and Wear Predictions of Metal-on-Plastic Hip ReplacementsBiotribology, 2022
- Review on additive hybrid- and multi-material-manufacturing of metals by powder bed fusion: state of technology and development potentialProgress in Additive Manufacturing, 2021
- Impact of metal additive manufacturing parameters on the powder bed fusion and direct energy deposition processes: a comprehensive reviewProgress in Additive Manufacturing, 2021
- Microstructure, mechanical and tribological properties of cold sprayed Ti6Al4V–CoCr composite coatingsComposites Part B: Engineering, 2020
- Additive manufacturing of hybrid metal/polymer objects via multiple-material laser powder bed fusionAdditive Manufacturing, 2020
- Effect of surface mechanical attrition treatment on the microstructure of cobalt–chromium–molybdenum biomedical alloyMicroscopy Research and Technique, 2020
- Optimization of Binder Jetting Using Taguchi MethodJOM, 2017
- Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelainDental Materials, 2008