Incorporation of Zinc Hydroxide Sulphate (ZHS) Nanoplates into Epoxy Resin to Improve Its Corrosion Protection
Open Access
Abstract
Zinc hydroxide sulphate (ZHS) nanoplates were synthesized and then characterized by various methods, including field-emission electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron microscopy (XPS), thermal gravimetric analysis (TGA), and the Brunauer–Emmett–Teller (BET) theory. Then, the synthesized ZHS nanoplates were incorporated into the epoxy coating on a ST 37 steel alloy. No change in the morphology of the epoxy coating was observed after incorporating 1 wt. % ZHS nanoplates. Uniform distribution of the incorporated ZHS nanoplates inside the epoxy coating was confirmed by transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). Atomic force microscopy (AFM) images showed that the surface roughness (Sa) of the neat epoxy coating was about 1.1 µm, which was increased to about 2.1 µm by the incorporation of the ZHS nanoplates. The water contact angle on the coating was changed from 82.1 to 90.8° after incorporating the ZHS nanoplates, which may be attributed to the surface roughness. Electrochemical impedance spectroscopy (EIS) experiments showed that the polarization resistance of the epoxy coating in a 3.5 wt. % NaCl solution after 28 days of immersion was about 2.03 MΩ cm2, and increased to about 9.47 MΩ cm2 after adding the ZHS nanoplates. In addition, the capacitance of the ZHS-containing epoxy coating after 28 days of immersion in the corrosive solution was about 0.07 nsnΩ−1cm−2. The obtained value was more than four times lower than the value obtained for the neat epoxy coating (0.32 nsnΩ−1cm−2). The results of the EIS measurements indicated a significant increase in the corrosion resistance of the epoxy coating after the addition of the ZHS nanoplates. The improvement in the corrosion was explained by the filling of the possible defects and trapping of the aggressive agents by the incorporated ZHS nanoplates. FESEM and EDS analyses at the end of the immersion period confirmed the results of the corrosion tests.Keywords
This publication has 42 references indexed in Scilit:
- Fabrication and characterization of layered double hydroxide/silane nanocomposite coatings for protection of mild steelJournal of the Taiwan Institute of Chemical Engineers, 2017
- Amelioration of anticorrosion and hydrophobic properties of epoxy/PDMS composite coatings containing nano ZnO particlesProgress in Organic Coatings, 2016
- Thermal decomposition of zinc hydroxy-sulfate-hydrate mineralsJournal of Thermal Analysis and Calorimetry, 2016
- Investigation of corrosion protection performance of epoxy coatings modified by polyaniline/clay nanocomposites on steel surfacesProgress in Organic Coatings, 2014
- Active Corrosion Protection by Nanoparticles and Conversion Films of Layered Double HydroxidesCorrosion, 2013
- Effect of nano-sized mesoporous silica MCM-41 and MMT on corrosion properties of epoxy coatingProgress in Organic Coatings, 2012
- Zn–Al layered double hydroxides as chloride nanotraps in active protective coatingsCorrosion Science, 2012
- Electrodeposition of Zinc Hydroxysulfate Nanosheets and Reduction to Zinc Metal Microdendrites on Polypyrrole FilmsJournal of Nanoscience and Nanotechnology, 2012
- Preparation and anticorrosive properties of PANI/Na-MMT and PANI/O-MMT nanocompositesProgress in Organic Coatings, 2008
- An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part II.Corrosion Science, 2003