The Time Development of the Microstructural Properties of Plastic Concrete: Material Insights and Experimental Boundaries
Open Access
- 10 March 2025
- journal article
- research article
- Published by MDPI AG in Construction Materials
- Vol. 5 (1) , 14
Abstract
Plastic Concrete is a low-strength ( ≤ 1.0 MPa), low-stiffness impervious concrete used for cut-off walls in earthen dams worldwide. These properties are achieved through a very high w/c ratio (w/c ≥ 3.0) and water-binding additions (e.g., bentonite). To date, the effect of mix design, especially w/c ratio, as well as bentonite content and type, on the long-term time development of the microstructural properties and corresponding compressive strength of Plastic Concrete has yet to be systematically studied. Furthermore, in the literature, mercury intrusion porosimetry (MIP) and X-ray diffractometry (XRD) have yet to be applied systematically to Plastic Concrete for this purpose. The present study closes this gap. Ten Plastic Concrete mixes with two bentonite–cement ratios, three types of sodium bentonite and two swelling times were produced. MIP and XRD measurements and compressive strength tests were performed at sample ages of 7 d, 28 d, 56 d, 91 d and four years. The results show that both MIP and XRD can be successfully used; however, meticulous sample preparation and data analysis must be considered. The porosimetry results show a bi-modal pore size distribution, with two age-dependent peaks at approximately 10,000–20,000 nm and 100–700 nm. The results also exhibit a clear pore refinement over time, with coarse porosity dropping from 26% to 15% over four years. In addition, the fine porosity peak is significantly refined over time and positively correlates with the significant increase in compressive strength. The XRD results show no unexpected crystalline phases over the same period. Overall, this study links MIP and corresponding compressive strength data specifically for Plastic Concrete for the first time, confirming the key role that the mix design of Plastic Concrete plays in defining its long-term microstructural and mechanical properties and ensuring more realistic cut-off wall design in the future. In addition, the experimental boundaries for MIP testing on Plastic Concrete are set out for the first time, enabling future research in this field.
Keywords
This publication has 42 references indexed in Scilit:
- Early hydration and microstructure formation of Portland cement paste studied by oscillation rheology, isothermal calorimetry, 1H NMR relaxometry, conductance and SAXSCement and Concrete Research, 2020
- Effect of Dry and Saturated Bentonite on Plastic ConcreteKSCE Journal of Civil Engineering, 2019
- Bentonithandbuch2016
- Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and applicationJournal of Porous Materials, 2013
- Clay Science2013
- Grundbau‐Taschenbuch2008
- Material properties of portland cement paste with nano-montmorilloniteJournal of Materials Science, 2007
- The effect of clay content in sands used for cementitious materials in developing countriesCement and Concrete Research, 2007
- A water sorptivity test for martar and concreteMaterials and Structures, 1998
- Tonminerale und Tone1993