Effect of carbon/kevlar reinforcement and hybrid order on mechanical properties of glass/epoxy composites
- 18 August 2021
- journal article
- research article
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (3) , 3377-3388
Abstract
Materials with high strength to weight ratio are the prime focus in material development research. These lightweight materials can replace the conventional high-density materials. The mechanical properties of epoxy laminates produced from woven reinforcements (glass, kevlar, and carbon) and their hybrid configurations (sandwich, intercalated) are examined in the current study. The composites were made using hand layup and compression moulding and are sliced into coupons and characterized as per ASTM standards and the influence of different reinforcements and their hybrid arrangement on tensile, hardness, and impact parameters evaluated and reported. The result shows the carbon epoxy laminates have the highest tensile strength, while kevlar epoxy laminates have the highest impact strength. The positive response on hybridization is noted, in particular, sandwich hybrids shows better properties compared to intercalated hybrids. The composites with the higher tensile strength fibers in the outermost layer account for elevated mechanical properties. The fiber and lamina morphology on the manufactured and fractured specimens was further investigated using the field emission scanning electron microscopy (FESEM) technique. The investigation reveals improved adhesion in the specimens. The fractured specimen shows delamination, fiber pullout (voids), and broken fibres which lower the properties of the composites.Keywords
This publication has 20 references indexed in Scilit:
- Studies on hybridization effect of jute/kenaf/E-glass woven fabric epoxy composites for potential applications: Effect of laminate stacking sequencesJournal of Industrial Textiles, 2017
- Fabrication and Characterization of MWCNT Filled Hybrid Natural Fiber CompositesJournal of Natural Fibers, 2017
- Mechanical properties of betel nut and glass fibre reinforced hybrid polyethylene compositesInternational Journal of Automotive and Mechanical Engineering, 2016
- Thermal and Mechanical Investigation of Interlaminate Glass/Curaua Hybrid Polymer CompositesJournal of Natural Fibers, 2016
- Hybridization effect of basalt and carbon fibers on impact and flexural properties of phenolic compositesIranian Polymer Journal, 2014
- Analysis of curaua/glass hybrid interlayer laminatesJournal of Reinforced Plastics and Composites, 2014
- Effect of fiber type and combinations on the mechanical, physical and thermal stability properties of polyester hybrid compositesComposites Part B: Engineering, 2013
- Influence of the Stacking Sequence on the Mechanical Properties of Glass/Sisal Hybrid CompositesJournal of Reinforced Plastics and Composites, 2008
- Tensile, impact and dielectric properties of three dimensional orthogonal aramid/glass fiber hybrid compositesJournal of Materials Science, 2007
- Impact behavior of aramid fiber/glass fiber hybrid composites: The effect of stacking sequencePolymer Composites, 2001