Comparative Analysis of Mechanical Properties: Conventional vs. Additive Manufacturing for Stainless Steel 316L
Open Access
- 29 September 2024
- Vol. 17 (19) , 4808
Abstract
This research investigates the tensile strength and microstructural properties of stainless steel 316L, comparing samples fabricated using additive manufacturing (AM) to those produced via conventional manufacturing techniques such as forging and casting using stainless steel 316L for its mechanical performance and corrosion resistance. Tensile tests revealed that AM samples had an ultimate tensile strength (UTS) of 650 MPa, a yield strength of 550 MPa and an elongation at break of 20%, and conventionally manufactured samples achieved a UTS of 580 MPa, a yield strength of 450 MPa and a higher elongation at break of 35%. The reduced ductility of AM samples is offset by their higher strength. Scanning electron microscopy (SEM) analysis showed that AM samples had a refined grain structure, with grain sizes ranging from 1 to 5 µm, whereas conventionally produced samples exhibited larger grain sizes of 10 to 20 µm, contributing to their increased ductility. This shows that while AM processes can give a rather high strength, the ductility property is simpler to attain with casting. Further work is needed to investigate post-processing techniques like hot isotropic pressing (HIP) and heat treatments for enhancing the ductility of AM parts as well as mechanical properties.Keywords
This publication has 18 references indexed in Scilit:
- The effects of SLM process parameters on the relative density and hardness of austenitic stainless steel 316LJournal of Materials Research and Technology, 2024
- Effect of microstructural evolution during melt pool formation on nano-mechanical properties in LPBF based SS316L partsJournal of Alloys and Compounds, 2023
- Microstructure and mechanical properties relationship of additively manufactured 316L stainless steel by selective laser meltingEPJ Nuclear Sciences & Technologies, 2019
- Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steelAdditive Manufacturing, 2019
- Additive manufacturing of metallic components – Process, structure and propertiesProgress in Materials Science, 2018
- Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steelJournal of Materials Processing Technology, 2017
- Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel partsMaterials & Design, 2016
- Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser MeltingJournal of Materials Engineering and Performance, 2014
- Metal Additive Manufacturing: A ReviewJournal of Materials Engineering and Performance, 2014
- Analysis of variance (ANOVA)Chemometrics and Intelligent Laboratory Systems, 1989