Uncertainty of Quantitative X-ray Fluorescence Micro-Analysis of Metallic Artifacts Caused by Their Curved Shapes
Open Access
Abstract
This paper summarizes the effects of irregular shape on the results of a quantitative X-ray fluorescence (XRF) micro-analysis. These effects become relevant when an XRF analysis is performed directly on an investigated material. A typical example is XRF analyses of valuable and historical objects whose measurements should be performed non-destructively and non-invasively, without taking samples. Several measurements and computer simulations were performed for selected metallic materials and shapes to evaluate the accuracy and precision of XRF. The described experiments and the corresponding Monte Carlo simulations were related to the XRF device designed and utilized at the Czech Technical University. It was found that the relative uncertainty was typically about 5–10% or even higher in quantitative analyses of minor elements due to irregular shapes of surfaces. This must be considered in cases of the interpretation of XRF results, especially in the cultural heritage sciences. The conclusions also contain several recommendations on how to measure objects under hard-to-define geometric conditions with respect to reduction in the surface effect in quantitative or semi-quantitative XRF analyses.Keywords
Funding Information
- European Regional Development Fund Project “Center for Advanced Applied Sciences” (CZ.02.1.01/0.0/0.0/16_019/0000778)
This publication has 18 references indexed in Scilit:
- Reduction of surface effects and relief reconstruction in X-ray fluorescence microanalysis of metallic objectsJournal of Analytical Atomic Spectrometry, 2011
- Monte Carlo simulations of disturbing effects in quantitative in-situ X-ray fluorescence analysis and microanalysisNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2010
- Use of MCNP code in energy dispersive X-ray fluorescenceNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2007
- Evaluation of effects of irregular shape on quantitative XRF analysis of metal objectsX-Ray Spectrometry, 2006
- Radiation applications in art and archaeometryNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2004
- Analysis of fresco paintings by X-ray fluorescence methodRadiation Physics and Chemistry, 2001
- Non-destructive analysis of small irregularly shaped homogenous samples by X-ray fluorescence spectrometryAnalytica Chimica Acta, 2000
- Use of microscopic XRF for non-destructive analysis in art and archaeometryX-Ray Spectrometry, 2000
- X‐RAY FLUORESCENCE ANALYSIS OF ANCIENT GLASS: THE IMPORTANCE OF SAMPLE PREPARATIONArchaeometry, 1977
- The theoretical derivation of fluorescent X-ray intensities from mixturesSpectrochimica Acta, 1955