Metallurgical, mechanical and corrosion behavior of Interpulse and pulsed current TIG dissimilar welds of Monel 400 and AISI 316L
- 12 December 2023
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Abstract
This research work explores the weldability, structural integrity, mechanical properties, and corrosion behavior of dissimilar welds of Monel 400 and AISI 316L developed by using Interpulse and pulse arc current modes in TIG welding process. ERNiCrMo-3 filler of 1.6 mm was used to fill the V-groove configuration of 5 mm thick plates in multiple passes. Metallurgical changes were observed in both Interpulse and pulsed current dissimilar weldments using optical and scanning electron microscope techniques. Mechanical properties of the joined structures were evaluated by performing tensile tests on UTM and hardness measurements on weld surfaces using Vickers hardness tester. The resistance against the corrosion especially at the weld area of both welded structures was measured using a cyclic sweep test. From the XRT and visual inspection analyses, the joined structures were free from defects and also seen the uniformity of the filler distribution toward the base metals. The grain structure with well-defined grain structures were identified in PC-TIG weldments whereas fine grains with clear distribution of filler alloying elements were seen in Interpulse-TIG weldments. Interpulse-TIG weldments exhibited with better mechanical and corrosion resistance properties than the PC-TIG weldments vowing to constricted arc mode during the welding process.Keywords
This publication has 24 references indexed in Scilit:
- Microstructure evolution and metallurgical characteristic of bead-on-plate TIG welding of Ti-6Al-4V alloyJournal of Materials Processing Technology, 2019
- Effect of Residual Stresses of GTA Welding for Dissimilar MaterialsMaterials Research, 2018
- Comparison of pulsed and continuous current gas tungsten arc welding in dissimilar welding between UNS S32750 and AISI 321 in optimized conditionThe International Journal of Advanced Manufacturing Technology, 2018
- Investigations on the microstructure and mechanical properties of dissimilar welds of inconel 718 and sulphur rich martensitic stainless steel, AISI 416Journal of Manufacturing Processes, 2018
- A Review of Research Progress on Dissimilar Laser Weld-Brazing of Automotive ApplicationsIOP Conference Series: Materials Science and Engineering, 2018
- Interpulse Tig Welding of Titanium Alloy (TI-6Al-4V)Indian Welding Journal, 2017
- Effect of Continuous and Pulsed Current GTA Welding on the Performance of Dissimilar Welds Involving Aerospace Grade AlloysTransactions of the Indian Institute of Metals, 2017
- Dissimilar welding of super-duplex and super-austenitic stainless steelsWelding in the World, 2016
- Development of pulsed current gas tungsten arc welding technique for dissimilar joints of marine grade alloysJournal of Manufacturing Processes, 2016
- Influence of filler metals and welding techniques on the structure–property relationships of Inconel 718 and AISI 316L dissimilar weldmentsMaterials & Design (1980-2015), 2014