Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nakul Gupta has a total of 143 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Environmental Conservation by Using Recycled Aggregates: Enhancing Sustainability in Road Construction

    by Parveen Berwal, Nakul Gupta, Ravi Kumar, El-Sayed M. Sherif, Ashish Kumar

    Every day, construction and demolition waste is generated worldwide. As the road business and traffic grow, construction materials have evolved to include more unorthodox features. Road construction and maintenance rely significantly on quarried aggregates, resulting in high resource extraction demands. There is a trend toward employing secondary (recycled) materials rather than primary (virgin) ones to address this. This transformation requires the use of a variety of secondary and tertiary components, including waste byproducts. Numerous studies have been conducted to study and analyze the suitability and practical application of recycled materials in the field. Some recycled materials have better qualities than others, proving satisfactory performance in real-world circumstances. However, concerns about their incorporation persist, based on laboratory research and field observations. These concerns emphasize the necessity for more in-depth research to address potential difficulties. It is claimed that using recycled and tertiary materials in road construction can greatly help to save natural resources. This study predicts the attributes of selected materials, such as gradation, water absorption, maximum dry density, impact value, flakiness, and elongation, to establish their appropriateness for the production of Granular Sub-base (GSB) and Wet Mix Macadam (WMM).


  • Tribological investigation into nickel-coated graphite polytetrafluoroethylene composites

    by Yp Deepthi, Santosh Kumar Sahu, D Anitha, Nakul Gupta, Niranjan Dude, Srinivasu Gangi Setti, Cd Sandeep

    The friction and wear resistance of polytetrafluoroethylene (PTFE) composites can be enhanced by incorporating nickel-coated graphite. An electroless coating method employing Gin plates (418A, 418B) is utilized to produce nickel-coated graphite. X-ray diffractometer analysis reveals the presence of nickel and graphite peaks in the coated graphite powders at 44° and 26.4°, respectively. Scanning electron microscopy images confirm the presence of nickel coating on graphite particles. Tribological tests using a pin-on-disc tribometer (L9) demonstrate that composites filled with 20 wt.% Nickel-coated graphite exhibits the lowest wear rate of 220 µm, compared to 1166 µm for pure PTFE specimens. The notable improvement in wear resistance is attributed to enhanced bonding strength between the filler and matrix material. Pure PTFE exhibits varying coefficient of friction (CoF) at different parameters, with the highest and lowest CoF observed at 200 rpm, 20N and 180 rpm, 10 N, respectively. Optimal parameters for minimizing wear rate and CoF, determined through analysis of means, include a 20 wt.% filler concentration, disc speed of 180 rpm, and 10N load. Analysis of variance identifies composition and speed as primary factors affecting wear and CoF.


  • Assessment of shear wall quantity on seismic performance of high-rise building

    by Tabarej Alam, Rajiv Banerjee, Vipin Mahadeven, Nakul Gupta, Arun Kumar Parashar


  • Open Access

    Behavior of Fibers in Geopolymer Concrete: A Comprehensive Review

    by Ujjwal Sharma, Nakul Gupta, Alireza Bahrami, Yasin Onuralp Özkılıç, Manvendra Verma, Parveen Berwal, Essam Althaqafi, Mohammad Amir Khan, Saiful Islam

    Over the last decades, cement has been observed to be the most adaptive material for global development in the construction industry. The use of ordinary concrete primarily requires the addition of cement. According to the record, there has been an increase in the direct carbon footprint during cement production. The International Energy Agency, IEA, is working toward net zero emissions by 2050. To achieve this target, there should be a decline in the clinker-to-cement ratio. Also, the deployment of innovative technologies is required in the production of cement. The use of alternative binding materials can be an easy solution. There are several options for a substitute to cement as a binding agent, which are available commercially. Non-crystalline alkali-aluminosilicate geopolymers have gained the attention of researchers over time. Geopolymer concrete uses byproduct waste to reduce direct carbon dioxide emissions during production. Despite being this advantageous, its utilization is still limited as it shows the quasi-brittle behavior. Using different fibers has been started to overcome this weakness. This article emphasizes and reviews various mechanical properties of fiber-reinforced geopolymer concrete, focusing on its development and implementation in a wide range of applications. This study concludes that the use of fiber-reinforced geopolymer concrete should be commercialized after the establishment of proper standards for manufacturing.


  • Optimization to release net zero emission in built environment from newly developed natural fiber–hybrid composite

    by Tamilselvan Amuthan, Nagaraj Nagaprasad, Vijayan Somurajan, Nakul Gupta, Ramakrishnan Kulasekaran Sathish Kumar, Ramaswamy Krishnaraj, Vijilius Helena Raj, R. Srinivas, Kuldeep K. Saxena, Sujata Deshmukh

    This article focuses on investigating the dynamic behavior of hybrid composites involving natural fibers. The objective of this study is to examine and evaluate the effectiveness of recently used hybrid composite materials. The primary materials utilized are glass fiber-reinforced plastic. Plastic is applied to the surface of fiber-reinforced epoxy composites. Natural fibers are also used in other materials, polyester-based hybrid composites. The breakage pressure of the double shear test in the first composition has been improved from 1.10 to 1.38[ ]kN. The hardness rating was enhanced from 76.15 to 87.99. The interlamination experimental findings improved from 7.96 to 8.52[ ]kN. The results showed that a hybrid with a 50:50 comparable strand ratio of glass and sisal outscored a hybrid with a small fraction of sisal fiber. The second composite describes the effects of natural filler loading at 5%, 10%, and 15% on the mechanical behavior of a polyester-based hybrid. Materials created in a reputable environment for automotive and marine applications. Both hybrid nanocomposite preparation methods are tested, and the findings are validated. The electrical and mechanical characteristics of the materials are also validated and demonstrated to be superior to other current composites. This study highlights composite materials and technological advances and discusses natural fibers’ rich history and promise in many applications.

  • Fabrication of natural fiber-mixed natural matrix composite-infused indoor air purifier with health impact simulation

    by Phani Prasanthi, M. S. R. Niranjan Kumar, V. V. Venu Madhav, Nakul Gupta, V. Revathi, A. Somaiah, Kuldeep K. Saxena, Dipali Bhole

    The inhalation of airborne particles can endanger the health of any human being. Natural fiber and natural fiber reinforced with natural matrix material are employed in this work to create an indoor air purifier. Various natural fiber and natural composite combinations are used to purify the interior environment by eliminating particulate matter of various sizes and volatile organic chemicals. An air purifier is created using four distinct natural fibers, including hemp, jute, silk cocoon, and coir fibers, as well as neem and aloe vera gel as natural filler materials. An air quality-monitoring instrument is used to validate the performance of the designed natural fiber/natural plant-based filler material-equipped air purifier. Particulate matter of various sizes and volatile organic compounds in the indoor environment are detected at various time intervals. The efficacy of the air purifier is afterward determined in human lungs of various ages utilizing health impact simulation studies. The current product is utilized to effectively purify indoor air by eliminating particulates and volatile organic chemicals.


  • Metallurgical, mechanical and corrosion behavior of Interpulse and pulsed current TIG dissimilar welds of Monel 400 and AISI 316L

    by Balram Yelamasetti, Santhi Sree N, Kuldeep K Saxena, Nakul Gupta, Naveen Kumar P, Sagar Dnyaneshwar Shelare

    This research work explores the weldability, structural integrity, mechanical properties, and corrosion behavior of dissimilar welds of Monel 400 and AISI 316L developed by using Interpulse and pulse arc current modes in TIG welding process. ERNiCrMo-3 filler of 1.6 mm was used to fill the V-groove configuration of 5 mm thick plates in multiple passes. Metallurgical changes were observed in both Interpulse and pulsed current dissimilar weldments using optical and scanning electron microscope techniques. Mechanical properties of the joined structures were evaluated by performing tensile tests on UTM and hardness measurements on weld surfaces using Vickers hardness tester. The resistance against the corrosion especially at the weld area of both welded structures was measured using a cyclic sweep test. From the XRT and visual inspection analyses, the joined structures were free from defects and also seen the uniformity of the filler distribution toward the base metals. The grain structure with well-defined grain structures were identified in PC-TIG weldments whereas fine grains with clear distribution of filler alloying elements were seen in Interpulse-TIG weldments. Interpulse-TIG weldments exhibited with better mechanical and corrosion resistance properties than the PC-TIG weldments vowing to constricted arc mode during the welding process.