Research on the Residual Bearing Capacity of a Rib Beam Bridge Carriageway Slab Based on Fatigue Cumulative Damage
Open Access
Abstract
In order to study the residual bearing capacity of the carriageway slab of a reinforced concrete rib beam bridge after fatigue damage, a double T-beam carriageway slab model with a high degree of symmetry was designed and fatigue tests were carried out. Based on the fatigue cumulative damage theory, the fatigue residual strength equation of concrete was improved and a constitutive fatigue model of a steel bar and concrete with arbitrary loading times was established. Because the carriageway slabs are highly symmetrical, we used a ratio of length to width and a ratio of width to height to express the dimensional changes in the carriageway slabs. Abaqus general analysis program was used to create a symmetrical T-beams model and analyze the influence of the fatigue load level, the ratio of width to height of the roadway slab, and the ratio of length to width on the remaining bearing capacity of the roadway slab. Finally, the 1stOpt fitting software was employed to fit the roadway slab’s residual bearing capacity evaluation model. The fatigue test results show that the fatigue failure form of the roadway slab is punching failure, and the development law of fatigue damage can be divided into three stages, accounting for 6.25%, 56.25%, and 37.5% of the total fatigue life. The finite element analysis results showed that the length–width ratio of the roadway slab is positively correlated with its relative residual bearing capacity, and the residual bearing capacity of the two-way slab is higher than that of the one-way slab. The fatigue load level and the aspect ratio of width to height are negatively correlated with their relative residual bearing capacity.Keywords
Funding Information
- Department of Communications of Heilongjiang Province (HJ-2019-02-1)
This publication has 18 references indexed in Scilit:
- Testing and modelling the fatigue behaviour of GFRP composites – Effect of stress level, stress concentration and frequencyEngineering Science and Technology, an International Journal, 2020
- Study on the effect of length–short side ratio on the fatigue performance of the rib girder bridge's carriageway slabInternational Journal of Structural Integrity, 2020
- Fracture Mechanics–Based Fatigue Life Prediction Method for RC Slabs in Punching Shear Failure ModeJournal of Structural Engineering, 2020
- Ermüdung von Beton bei mehrachsiger und mehrstufiger BeanspruchungBeton- und Stahlbetonbau, 2019
- Determination of dominant degradation mechanisms of RC bridge deck slabs under cyclic moving loadsInternational Journal of Fatigue, 2018
- Fatigue behaviour of a normal‐strength concrete – number of cycles to failure and strain developmentStructural Concrete, 2016
- Untersuchungen zum Ermüdungsverhalten eines höherfesten NormalbetonsBeton- und Stahlbetonbau, 2015
- A Computational Simulation for the Damage Mechanism of Steel-Concrete Composite Slabs under High Cycle Fatigue LoadsJournal of Advanced Concrete Technology, 2011
- Realistic Models for Local Bond Stress-Slip of Reinforced Concrete under Repeated LoadingJournal of Structural Engineering, 2007
- Fatigue Analysis of RC Slabs and Repaired RC Slabs Based on Crack Bridging Degradation ConceptJournal of Structural Engineering, 2006