BCBinglin Chen

Binglin Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Binglin Chen has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fatigue Performance of Rib Beam Bridge Slabs Reinforced with Polyurethane Concrete Based on the Damage Theory

    by Yifan Wang, Tianlai Yu, Linlin Zhang, Lihui Yin, Yuxuan Wu, Binglin Chen

    In this paper, the rib beam bridge slabs were taken as the research object. Static load and fatigue tests were carried out on the benchmark bridge slabs to determine the ultimate load capacity and fatigue life of the bridge slabs. Then, the bridge slab was pre-damaged and reinforced with polyurethane concrete. A fatigue test was carried out on the reinforced bridge slab to study the fatigue performance. Based on the damage theory, the fatigue damage reinforcement finite element models of the bridge slabs under different damage degrees were established. The fatigue performance of the reinforced bridge slabs was systematically studied. The results show that the fatigue damage of the reinforced bridge slab developed in stages. Compared to the unreinforced bridge slab, the fatigue damage of the reinforced bridge slab was significantly reduced at each stage. According to the least square method and numerical analysis results, a residual-bearing-capacity model including damage degree and fatigue cycles of the reinforced bridge slabs is proposed, which can be used as a reference in bridge slab reinforcement design.


  • Open Access

    Research on the Residual Bearing Capacity of a Rib Beam Bridge Carriageway Slab Based on Fatigue Cumulative Damage

    by Yuxuan Wu, Tianlai Yu, Linlin Zhang, Yifan Wang, Binglin Chen

    In order to study the residual bearing capacity of the carriageway slab of a reinforced concrete rib beam bridge after fatigue damage, a double T-beam carriageway slab model with a high degree of symmetry was designed and fatigue tests were carried out. Based on the fatigue cumulative damage theory, the fatigue residual strength equation of concrete was improved and a constitutive fatigue model of a steel bar and concrete with arbitrary loading times was established. Because the carriageway slabs are highly symmetrical, we used a ratio of length to width and a ratio of width to height to express the dimensional changes in the carriageway slabs. Abaqus general analysis program was used to create a symmetrical T-beams model and analyze the influence of the fatigue load level, the ratio of width to height of the roadway slab, and the ratio of length to width on the remaining bearing capacity of the roadway slab. Finally, the 1stOpt fitting software was employed to fit the roadway slab’s residual bearing capacity evaluation model. The fatigue test results show that the fatigue failure form of the roadway slab is punching failure, and the development law of fatigue damage can be divided into three stages, accounting for 6.25%, 56.25%, and 37.5% of the total fatigue life. The finite element analysis results showed that the length–width ratio of the roadway slab is positively correlated with its relative residual bearing capacity, and the residual bearing capacity of the two-way slab is higher than that of the one-way slab. The fatigue load level and the aspect ratio of width to height are negatively correlated with their relative residual bearing capacity.


  • Open Access

    Research on Fatigue Performance of the Rib Beam Bridge Carriageway Slab Based on Cumulative Damage Theory

    by Binglin Chen, Tianlai Yu, Linlin Zhang, Yuxuan Wu, Yifan Wang

    The purpose of this paper is to study the development law of fatigue damage of the carriageway slab of reinforced concrete ribbed girder bridge and to provide theoretical support for carriageway slab design. The fatigue test of reinforced concrete rib beam bridge carriageway slabs was conducted. Based on the material fatigue damage theory, the fatigue damage model was established by ABAQUS software. The fatigue performance, failure mechanism, and the effect of fatigue level on the fatigue performance of the carriageway slab were studied. The experimental research results show that when the slab of the rib beam bridge was fatigued, and the radial crack appeared at the bottom of the slab, which belonged to punching shear failure. The fatigue failure process was divided into three stages as follows: in the initial stage of fatigue, the deflection and reinforcement strain increased linearly with fatigue times, and in the stable development stage, the bottom deflection and reinforcement strain increased steady progression. With the increase in fatigue cycles, the fatigue accumulation damage was gradually accumulated, and the stiffness of the carriageway slab gradually decreases. In the rapid development stage, the deflection, reinforcement strain, and crack growth speed were significantly increased. According to the fatigue damage model, the simulation analysis results show that the accumulated damage to the bridge carriageway was more serious with the increase in fatigue load level. The fatigue damage degree was lower when the design fatigue load level is not greater than 0.55.