The Effects of Core Machining Configurations on the Mechanical Properties of Cores and Sandwich Structures
Open Access
Abstract
Composite sandwich structures are widely used in the fields of aviation, marine, and energy due to their high specific stiffness and design flexibility. Improving the mechanical properties of the cores is significant to the strength, modulus, and stability of composite sandwich structures. Two kinds of core machining configurations were designed by combining thin grooves, perforated holes, and thick contour cuts as well as non-machining plain cores. The cores and sandwich structures with these configurations were fabricated using a vacuum-assistant infusion process. Static tensile, compressive, shear, and peeling tests were conducted on the infused cores and sandwich structures. The results showed that the tensile, compressive, and shear moduli, and compressive strength of the infused cores can be greatly improved. The tensile strength changed negligibly due to stress concentration induced by irregular foam cell and the shear-lag phenomenon of the resin column/foam interface. The shear strength of the infused cores increased slightly. The thick contour cuts and perforated holes can greatly improve the face sheet/core peel capacity of the sandwich structures, whereas the thin grooves can moderately improve the peel capacity. Both infused cores with the designed machining configurations exhibited positive effects on the compressive, tensile, and shear moduli, and compressive strength, considering the material costs. The study provides a comprehensive and quantitative insight into the effects of core machining configurations on mechanical properties of infused cores and composite sandwich structures.Keywords
This publication has 29 references indexed in Scilit:
- An investigation on the flexural properties of balsa and polymer foam core sandwich structures: Influence of core type and contour finishing optionsJournal of Sandwich Structures & Materials, 2013
- Improving delamination resistance capacity of sandwich composite columns with initial face/core debondComposites Part B: Engineering, 2012
- Experimental analysis of the through-thickness compression properties of z-pinned sandwich compositesComposites Part A: Applied Science and Manufacturing, 2011
- Mechanical properties of sandwich panels with perforated foam coresJournal of Sandwich Structures & Materials, 2010
- Impact response of three-dimensional stitched sandwich compositeComposite Structures, 2010
- The Elastic Properties of Sandwich Structure with Z-pinned Foam CoreJournal of Reinforced Plastics and Composites, 2008
- On the mechanical effect of stitch addition in sandwich panelComposites Science and Technology, 2006
- Influence of Face/Core Interface on Debond Toughness of Foam and Balsa Cored SandwichJournal of Sandwich Structures & Materials, 2006
- Mechanical properties balance in novel Z-pinned sandwich panels: Out-of-plane propertiesComposites Part A: Applied Science and Manufacturing, 2006
- Evaluation of durability and strength of stitched foam-cored sandwich structuresComposite Structures, 1999