Formation and properties of polypropylene/stearic acid composite fibers
Open Access
- 22 January 2015
- journal article
- research article
- Published by SAGE Publications in Textile Research Journal
- Vol. 86 (1) , 64-71
Abstract
This paper refers to the formation and properties of polypropylene/stearic acid (PP/SA) composite fibers. For the investigation, commercial metallocene-catalyzed PP polymer and SA were used. The fibers were produced in laboratory conditions using the single screw spin draw device. The textile-mechanical properties, surface composition, morphology and supermolecular structure of as-spun fibers were studied. Moreover, the nonisothermal crystallization of the PP/SA blend and melting behavior of fibers were analyzed. In the investigation Fourier transform infrared–attenuated total reflectance, scanning electron microscopy, differential scanning calorimetry and wide-angle X-ray analytical methods were used. The research showed that the PP/SA blend has lower viscosity compared to the pure polymer and that during the PP crystallization phase, separation is induced. SA delays crystallization of PP, and interaction between SA and PP is observed. The as-spun PP/SA fibers have higher linear density, higher elongation at break and slightly lower tenacity compared to fibers produced from pure PP. The fibers contain a structure with high content of mesophase. During fiber formation, SA migrates towards the fiber surface and forms droplets located beneath the surface of the fiber or crystallizes outside in the form of flake-like crystals.Keywords
This publication has 27 references indexed in Scilit:
- Formation of polypropylene/stearic acid fibersJournal of Applied Polymer Science, 2011
- Processing properties of polypropylene with a minor addition of silicone oilPolymer Engineering & Science, 2010
- PROPERTIES OF POLYPROPYLENE COMPOSITES REINFORCED WITH STEARIC ACID TREATED SUGARCANE FIBERJournal of Polymer Engineering, 2007
- Hydrophilization of polypropylene films by using migratory additivesJournal of Vinyl and Additive Technology, 2007
- Effects of stearic acid coated talc, CaCO3, and mixed talc/CaCO3 particles on the rheological properties of polypropylene compoundsJournal of Applied Polymer Science, 2004
- Studying the mechanisms of titanium dioxide as ultraviolet‐blocking additive for films and fabrics by an improved schemeJournal of Applied Polymer Science, 2004
- Crystallization and orientation studies in polypropylene/single wall carbon nanotube compositePolymer, 2003
- Toughening of polypropylene with calcium carbonate particlesPolymer, 2003
- Functionalizing polymer surfaces by surface migration of copolymer additives: role of additive molecular weightPolymer, 2002
- Study on rough‐surface biaxially oriented polypropylene film. IV. Influence of addition of crystal nucleatorJournal of Applied Polymer Science, 1988