Enhancing Mechanical and Electrical Performance of Carbon Fiber-Reinforced Dry Rubber Composites through Surface Modification
- 25 July 2026
- journal article
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
Abstract
Fillers are essential for reinforcing natural rubber (NR) to achieve the desirable properties. However, traditional fillers such as carbon black and silica can compromise key properties such as electrical conductivity and antistatic performance. Although conductive fillers address these limitations, their high cost restricts their large-scale industrial adoption. Reclaimed milled carbon fibers (mCFs) have been explored as a low-cost conductive alternative. However, they suffer from degraded mechanical performance and poor interfacial adhesion, hindering their use. This work presents a scalable, oxidation-free diazonium-mediated surface modification strategy to improve the interfacial performance of mCF composites for multifunctional composite applications. Continuous and milled carbon fibers were first functionalized to install thiol functionality, followed by a heat-initiated thiol–ene reaction to graft styrene–butadiene rubber (SBR) (S-SBR) onto the fiber surface for incorporation into epoxy and NR matrices. The modified fibers exhibited a 23% increase in the interfacial shear strength. In epoxy composites, S-SBR-modified mCF improved the flexural modulus by 15.6% and fracture toughness by 26.5% at 5 and 15 wt % loadings, respectively, when compared to unmodified mCF. When incorporated into dry NR at 5 phr, the modified mCF demonstrated a 9-fold increase in electrical conductivity, comparable to conventional conductive fillers. Additionally, the wear rate decreased by 43% and the tensile strength improved by 24.9% relative to dry NR. These results establish an effective and scalable route to transform reclaimed carbon fibers into a high-value, multifunctional filler for sustainable elastomer and polymer composite systems.Keywords
Funding Information
- Office of Naval Research Global (N62909-22-1-2052)
- Deakin University (NA)
- University of Sri Jayewardenepura (NA)
- Graduate Program in Physics at UNIFAL-MG (DP220100130)
- Graduate Program in Physics at UNIFAL-MG (IH210100023)
- Graduate Program in Physics at UNIFAL-MG (IM230100048)
This publication has 73 references indexed in Scilit:
- Influence of Surface Chemistry on Carbon Fiber Structural Battery AnodesBatteries & Supercaps, 2025
- Spray Deposited Surface Treatment for Enhanced Mechanical Properties of Recycled Carbon Fiber Reinforced CompositesPolymer Composites, 2025
- Effect of Thermal Aging on the Tensile and Tribological Properties of Pineapple Leaf Fiber‐Reinforced Natural Rubber Composites Incorporating Multiwalled Carbon NanotubesPolymer Composites, 2025
- Real‐Time Structural Monitoring and Effective Interlaminar Reinforcement of Carbon Fiber Composites Hybrid With Surface Modified Non‐Woven Silk FabricPolymer Composites, 2025
- Improved Mechanical Performance of Epoxy Systems with Low Loadings of Milled Carbon Fiber via Chemical Surface ModificationAdvanced Engineering Materials, 2025
- Effects of surface modification on mechanical properties and electromagnetic interference shielding properties of carbon fiber/silk fiber hybrid compositesPolymer Composites, 2024
- A comparison of mechanical properties of recycled high‐density polyethylene/waste carbon fiber via injection molding and 3D printingPolymer Composites, 2022
- Enhanced mechanical property, thermal and electrical conductivity of natural rubber/graphene nanosheets nanocompositesPolymer Composites, 2019
- Effect of conductive polyaniline in thermoplastic natural rubber blends on the mechanical, thermal stability, and electrical conductivity propertiesJournal of Applied Polymer Science, 2019
- Thermal polymerization of thiol–ene network‐forming systemsPolymer International, 2007