Jaineel K. Shah
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jaineel K. Shah has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Elmer Austria
University of Sydney
2 shared publications- Luke Christian Henderson
Institute for Frontier Materials Deakin University Waurn Ponds Victoria Australia
2 shared publications Piers Coia
Deakin University
2 shared publicationsAkshay Krishna Ambika Harikumar
1 shared publicationBehnam Akhavan
1 shared publication- Behnam Akhavan
School of Biomedical Engineering, The University of Sydney, Sydney, NSW 2006, Australia
1 shared publication
Latest Publications
- 25 July 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
Enhancing Mechanical and Electrical Performance of Carbon Fiber-Reinforced Dry Rubber Composites through Surface Modification
Fillers are essential for reinforcing natural rubber (NR) to achieve the desirable properties. However, traditional fillers such as carbon black and silica can compromise key properties such as electrical conductivity and antistatic performance. Although conductive fillers address these limitations, their high cost restricts their large-scale industrial adoption. Reclaimed milled carbon fibers (mCFs) have been explored as a low-cost conductive alternative. However, they suffer from degraded mechanical performance and poor interfacial adhesion, hindering their use. This work presents a scalable, oxidation-free diazonium-mediated surface modification strategy to improve the interfacial performance of mCF composites for multifunctional composite applications. Continuous and milled carbon fibers were first functionalized to install thiol functionality, followed by a heat-initiated thiol–ene reaction to graft styrene–butadiene rubber (SBR) (S-SBR) onto the fiber surface for incorporation into epoxy and NR matrices. The modified fibers exhibited a 23% increase in the interfacial shear strength. In epoxy composites, S-SBR-modified mCF improved the flexural modulus by 15.6% and fracture toughness by 26.5% at 5 and 15 wt % loadings, respectively, when compared to unmodified mCF. When incorporated into dry NR at 5 phr, the modified mCF demonstrated a 9-fold increase in electrical conductivity, comparable to conventional conductive fillers. Additionally, the wear rate decreased by 43% and the tensile strength improved by 24.9% relative to dry NR. These results establish an effective and scalable route to transform reclaimed carbon fibers into a high-value, multifunctional filler for sustainable elastomer and polymer composite systems.
- 25 July 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
Enhancing Mechanical and Electrical Performance of Carbon Fiber-Reinforced Dry Rubber Composites through Surface Modification
Fillers are essential for reinforcing natural rubber (NR) to achieve the desirable properties. However, traditional fillers such as carbon black and silica can compromise key properties such as electrical conductivity and antistatic performance. Although conductive fillers address these limitations, their high cost restricts their large-scale industrial adoption. Reclaimed milled carbon fibers (mCFs) have been explored as a low-cost conductive alternative. However, they suffer from degraded mechanical performance and poor interfacial adhesion, hindering their use. This work presents a scalable, oxidation-free diazonium-mediated surface modification strategy to improve the interfacial performance of mCF composites for multifunctional composite applications. Continuous and milled carbon fibers were first functionalized to install thiol functionality, followed by a heat-initiated thiol–ene reaction to graft styrene–butadiene rubber (SBR) (S-SBR) onto the fiber surface for incorporation into epoxy and NR matrices. The modified fibers exhibited a 23% increase in the interfacial shear strength. In epoxy composites, S-SBR-modified mCF improved the flexural modulus by 15.6% and fracture toughness by 26.5% at 5 and 15 wt % loadings, respectively, when compared to unmodified mCF. When incorporated into dry NR at 5 phr, the modified mCF demonstrated a 9-fold increase in electrical conductivity, comparable to conventional conductive fillers. Additionally, the wear rate decreased by 43% and the tensile strength improved by 24.9% relative to dry NR. These results establish an effective and scalable route to transform reclaimed carbon fibers into a high-value, multifunctional filler for sustainable elastomer and polymer composite systems.
- Open Access
- 21 June 2026
- Published by Elsevier in Composites Part A: Applied Science and Manufacturing
- Vol. 210
Translating microscale interfacial modification to macroscale improvements in carbon fibre reinforced polypropylene composites
- 21 June 2026
- Published by Elsevier in Composites Part A: Applied Science and Manufacturing
- Vol. 210
Open AccessTranslating microscale interfacial modification to macroscale improvements in carbon fibre reinforced polypropylene composites