A Dual-Output Reconfigurable Shared-Inductor Boost-Converter/Current-Mode Inductive Power Management ASIC With 750% Extended Output-Power Range, Adaptive Switching Control, and Voltage-Power Regulation
- 23 August 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 13 (5) , 1075-1086
Abstract
This paper describes a dual-output, reconfigurable integrated power management (IPM) ASIC for inductive power delivery. The proposed ASIC operates either as a current-mode (CM) rectifier or a boost converter by sharing the receiver (Rx) coil (L Rx ) to improve performance of inductive power transmission against the variations of Rx input power (P Rx ) and dualoutput DC power (P L + P Hv ). Conventional IPM structures either fail to generate regulated outputs (e.g., V L and V Hv ) when the required P L + P Hv exceeds P Rx or suffer from low powerconversion efficiency (PCE) when PRx exceeds P L + P Hv due to voltage regulation and protection. To overcome these challenges, the proposed ASIC offers the unique capabilities of 1) generating multiple regulated outputs (V L = 2.6 V, V Hv = 3.9 V) directly from L Rx with single-stage conversion, 2) efficient CM operation with active rectification, enabled by adaptive switching control (ASC), 3) charging a large capacitor (C S ) with the purpose of operating as a shared-inductor boost converter (SBC), transferring energy from C S to C L and C Hv , when P Rx <; P L + P Hv , and 4) efficient voltage-power regulation (VPR). A proof-of-concept chip was fabricated in a 0.35-μm 2P4M standard CMOS process occupying 1.35-mm 2 active area. In measurements, the proposed ASIC was able to successfully provide regulated V L = 2.6 V and V Hv = 3.9 V despite significant variations in P Rx , P L , and P Hv . Moreover, the chip extended the peak output power range by 750% and improved the PCE by 1.3 times and 8.1 times thanks to the ASC and VPR, respectively.Keywords
Funding Information
- National Institutes of Health (1R21EY029424)
This publication has 28 references indexed in Scilit:
- A Dual-Output Thermoelectric Energy Harvesting Interface With 86.6% Peak Efficiency at 30 $\mu {\text {W}}$ and Total Control Power of 160 nWIEEE Journal of Solid-State Circuits, 2016
- A Figure-of-Merit for Design and Optimization of Inductive Power Transmission Links for Millimeter-Sized Biomedical ImplantsIEEE Transactions on Biomedical Circuits and Systems, 2016
- 21.5 A current-mode wireless power receiver with optimal resonant cycle tracking for implantable systems2016
- A voltage doubling passive rectifier/regulator circuit for biomedical implants2015
- An Auto-Reconfigurable AC-DC Regulator for Wirelessly Powered Biomedical Implants With 28% Link Efficiency EnhancementIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2015
- A Q-Modulation Technique for Efficient Inductive Power TransmissionIEEE Journal of Solid-State Circuits, 2015
- Inverting Buck-Boost DC-DC Converter for Mobile AMOLED Display Using Real-Time Self-Tuned Minimum Power-Loss Tracking (MPLT) Scheme With Lossless Soft-Switching for Discontinuous Conduction ModeIEEE Journal of Solid-State Circuits, 2015
- An Integrated Wireless Power Management and Data Telemetry IC for High-Compliance-Voltage Electrical Stimulation ApplicationsIEEE Transactions on Biomedical Circuits and Systems, 2015
- A System Verification Platform for High-Density Epiretinal ProsthesesIEEE Transactions on Biomedical Circuits and Systems, 2012
- An adaptive reconfigurable active voltage doubler/rectifier for extended-range inductive power transmissionIEEE Transactions on Circuits and Systems II: Express Briefs, 2012