Effect of Elevated Temperatures on Mechanical Properties of Spliced and Non-Spliced Steel Reinforcements: Experimental Study
Open Access
Abstract
Steel reinforcement is an essential part of reinforced concrete, providing structural strength. In case of fire, the steel reinforcement severely loses its mechanical properties, leading to structural collapse in some elevated temperatures. Thus, this work mainly investigates the mechanical properties of spliced and non-spliced steel reinforcements after being exposed to 500 °C, 700 °C, and 900 °C. The results show that the mechanical properties of steel reinforcements significantly change after exposure to temperatures exceeding 500 °C, and the diameter of steel reinforcements does not considerably affect post-fire properties. The proposed equations from previous work were also compared to the testing results in terms of post-fire stress–strain curves and mechanical properties, resulting in overestimation at temperatures of 700 °C and 900 °C. The study finds that using a mechanical coupler has the potential to increase the residual yield strength at a temperature of 500 °C, but it lacks post-fire elongation at a temperature of 700 °C due to observed failure behavior after testing. Furthermore, the failure occurred at the mechanical couplers when the exposure temperature reached 700 °C. The modulus of elasticity of non-splices was the most critical parameter, which was maximally different by 23.9% compared to non-spliced steel reinforcements.Keywords
Funding Information
- Faculty of Engineering, Thammasat University
- Thailand Science Research and Innovation Fundamental Fund
This publication has 31 references indexed in Scilit:
- Post-fire residual mechanical properties of concrete made with recycled rubber aggregateFire Safety Journal, 2013
- Residual Compressive Stress-Strain Relationship for Concrete Subjected to Elevated TemperaturesJournal of Structural Fire Engineering, 2012
- Experimental Study on Residual Flexural Behavior of Reinforced Concrete Beams after Exposure to FireAdvanced Materials Research, 2012
- An approach for evaluating the residual strength of fire-exposed RC beamsMagazine of Concrete Research, 2010
- Residual bond strength between steel bars and concrete after elevated temperaturesFire Safety Journal, 2009
- Experimental research on post-fire behaviour of reinforced concrete columnsFire Safety Journal, 2009
- Residual stress–strain relationship for concrete after exposure to high temperaturesCement and Concrete Research, 2006
- Post-fire behavior of bond between high strength pozzolanic concrete and reinforcing steelConstruction and Building Materials, 2004
- Effect of fire on flexural behaviour of rc beamsConstruction and Building Materials, 1996
- The reinstatement of fire damaged steel framed structuresFire Safety Journal, 1981