Simulation and analysis of the crankshaft system of the high-power marine engine
- 21 December 2024
- journal article
- research article
- Published by Kaunas University of Technology (KTU) in Mechanics
- Vol. 30 (6) , 523-530
Abstract
The crankshaft is one of the most important parts of the engine and is likened to the "backbone" of the engine. In this paper, NL9340 high power diesel engine crankshaft system as the research object, the finite element free mode simulation model of crankshaft was established, and the inherent frequency and vibration mode of crankshaft were calculated. Through the rigid-flexible coupling finite element simulation of the crankshaft system, the dynamic and kinematic characteristics of the crankshaft system were analyzed. It was calculated that the load spectrum of each cylinder connecting rod journal and piston pin mainly fluctuated in the range of 20000 kN, in which the maximum exciting forces of the first connecting rod journal and the second connecting rod journal are above 30000 kN. On this basis, the static strength of the crankshaft was simulated and analyzed. The results show that the stress is the greatest and most concentrated at the over-rounded corner between connecting rod journal and crank. The maximum equivalent stress and deformation occur at the second cylinder connecting rod journal, which are 14.103 MPa and 8.3683 e-3 mm respectively.Keywords
This publication has 21 references indexed in Scilit:
- Search for a high-mass dimuon resonance produced in association with b quark jets at $ \sqrt{s} $ = 13 TeVJournal of High Energy Physics, 2023
- Fracture failure analysis of flywheel hub served in heavy-fuel aviation piston engineEngineering Failure Analysis, 2023
- Effect of starting position of crankshaft on transient body vibrations of reciprocating compressorInternational Journal of Refrigeration, 2022
- Determination of the fatigue behavior of mechanical components through infrared thermographyEngineering Failure Analysis, 2022
- Comparative analysis on friction characteristics between free-piston engine generator and traditional crankshaft engineEnergy Conversion and Management, 2021
- Optimization of tank engine crank shaft material propertiesMechanics Based Design of Structures and Machines, 2021
- Failure Analysis of Ductile Iron Crankshaft in Four-Cylinder Diesel EngineInternational Journal of Metalcasting, 2021
- Assessment of Bending Fatigue Strength of Crankshaft Sections with Consideration of Quenching Residual StressJournal of Materials Engineering and Performance, 2016
- Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)Autophagy, 2016
- On the assessment of fatigue life of marine diesel engine crankshaftsEngineering Failure Analysis, 2015