Study on lap joining and characterization of tin (Sn) powder on stainless steel SS304 using microwave heating
- 28 December 2023
- journal article
- research article
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 54 (12) , 1659-1672
Abstract
Metal bonding via joints of low melting point materials such as zinc and tin has been technically challenging. This paper presents a unique technique for bonding small dimensions and the low melting point of materials through the microwave hybrid heating (MHH) process. Joint of stainless steel SS304 was applied to the joint with the tin (Sn) powder with the application of microwave radiation by using domestic microwave oven at 2.45 GHz of constant frequency, 200–360 W of microwave power, 120–180 s of exposure time, and 10–20 % of the epoxy rate. A developed heat chamber was used as a susceptor and insulator in the microwave hybrid heating (MHH) process. The tin powder and parent metals were strongly bonded as lap position by the microwave hybrid heating (MHH) process at 360 W of microwave power, 180 s of constant exposure time, and 20 % of the constant epoxy rate. Characterization of the joint was evaluated through microhardness and x‐ray diffraction (XRD) analysis techniques. It was found that the intermetallic compounds (phase) of nickel tin (NiSn), iron tin (Fe1.84Sn), sulfur tin (SSn), chromium tin (Cr2Sn3), chromium tin (CrSn2), and tin phosphorus (SnP) at the joint surface with highest microhardness obtained at 498.4 HV 0.05 at 360 W of microwave power.Keywords
This publication has 28 references indexed in Scilit:
- Comparative Analysis of Microwave based Joining/Welding of SS304-SS304 using Different Interfacing MaterialsMATEC Web of Conferences, 2016
- Joining of Inconel-625 alloy through microwave hybrid heating and its characterizationJournal of Manufacturing Processes, 2015
- Characterization of bulk stainless steel joints developed through microwave hybrid heatingMaterials Characterization, 2014
- Development and characterization of microwave composite claddingJournal of Manufacturing Processes, 2012
- A novel route for joining of austenitic stainless steel (SS-316) using microwave energyProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2011
- The effect of powder sintering method on the densification and microstructure of pewter alloysIOP Conference Series: Materials Science and Engineering, 2009
- Effect of laser welding parameters on fusion zone morphological, mechanical and microstructural characteristics of AISI 304 stainless steelMaterialwissenschaft und Werkstofftechnik, 2008
- Domestic microwave oven adapted for fast heat treatment of Ba0.5Sr0.5(Ti0.8Sn0.2)O3 powdersJournal of Materials Processing Technology, 2007
- A History of Microwave Heating ApplicationsIEEE Transactions on Microwave Theory and Techniques, 1984
- The Deformation and Ageing of Mild Steel: III Discussion of ResultsProceedings of the Physical Society. Section B, 1951