SJShamini Janasekaran

Shamini Janasekaran

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shamini Janasekaran has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Performance-Driven Adaptive Genetic Algorithms in Various Applications: A Review

    by Yingchen Ma, Shamini Janasekaran, Go Tze Fong, Hanan Zhu

  • Influence of zinc (Zn) powder on the microhardness characteristic and microstructure properties of stainless steel SS304 hybrid joint using low power microwave heating

    by W. Tayier, S. Janasekaran, V. C. Tai

    Microwave hybrid heating (MHH) process is a unique and novel approach of joint materials. Several lightweight materials (medium and high melting point) such as nickel, copper and aluminum have been successfully joined in the past research. However, small dimensions and low melting point of light weight materials such as zinc (Zn) metal or zinc (Zn) powder were always being a challenging mere for creating bond via any joining techniques. The sheets of stainless steel SS304 (17 mm×7.9 mm×0.2 mm) have been fabricated and joined at lap joint by using novel Microwave hybrid heating technique with mini heat chamber of 2.45 GHz of frequency and 200 W–360 W of microwave power, using pure zinc powder (99.9 %) as an interface material. Epoxy rate and exposure time have been varied from 10 % to 20 % and 2 min to 4 min, respectively. A developed heat chamber has been set in domestic microwave oven properly as proposed. To evaluate the microstructure correlation and microhardness at joint interface, the field emission scanning electron microscopy (FESEM – EDS), x‐ray diffraction (XRD) and Vickers hardness were used. For the experimental studies, it had found an excellent bonding was produced at interface layer between the upper and lower sections with good penetration rate of 360 W of microwave power, 4 min of exposure time and 20 % of epoxy rate as the 183.1 HV 0.05 of excellent microhardness and the intermetallic phase of iron‐zinc (FeZn11), nickel‐zinc (NiZn) and nickel‐zinc (NiZn3) were observed at interface layer.


  • Study on lap joining and characterization of tin (Sn) powder on stainless steel SS304 using microwave heating

    by W. Tayier, S. Janasekaran, V. C. Tai

    Metal bonding via joints of low melting point materials such as zinc and tin has been technically challenging. This paper presents a unique technique for bonding small dimensions and the low melting point of materials through the microwave hybrid heating (MHH) process. Joint of stainless steel SS304 was applied to the joint with the tin (Sn) powder with the application of microwave radiation by using domestic microwave oven at 2.45 GHz of constant frequency, 200–360 W of microwave power, 120–180 s of exposure time, and 10–20 % of the epoxy rate. A developed heat chamber was used as a susceptor and insulator in the microwave hybrid heating (MHH) process. The tin powder and parent metals were strongly bonded as lap position by the microwave hybrid heating (MHH) process at 360 W of microwave power, 180 s of constant exposure time, and 20 % of the constant epoxy rate. Characterization of the joint was evaluated through microhardness and x‐ray diffraction (XRD) analysis techniques. It was found that the intermetallic compounds (phase) of nickel tin (NiSn), iron tin (Fe1.84Sn), sulfur tin (SSn), chromium tin (Cr2Sn3), chromium tin (CrSn2), and tin phosphorus (SnP) at the joint surface with highest microhardness obtained at 498.4 HV 0.05 at 360 W of microwave power.


  • Resistance Spot Welding and Laser Welding Effect on Nickel Tab for Electric Vehicle Battery Development

    by M. Syafiq, N. H. Jamadon, A. Syahmi, S. Janasekaran, T. Zaharinie, R. Rangappa

  • Review: Current Trends in Artificial Intelligence on Healthcare

    by Shamini Janasekaran, Anas Zeyad Yousef, Amares Singh, Nashrah Hani Jamadon

  • Review: Role of Nanoparticles Growth and Alleviation of Abiotic Stress in Plants

    by Shamini Janasekaran, Bassem Farouk Ghorab, Mohamed Al Askari, Marawan Hisham Saad, Habib Ullah Khan, Abdulla Haroun Idriss

  • Open Access

    Development and Performance Evaluation of an IoT-Integrated Breath Analyzer

    by Abd Alghani Khamis, Aida Idris, Abdallah Abdellatif, Noor Ashikin Mohd Rom, Taha Khamis, Mohd Sayuti Ab Karim, Shamini Janasekaran, Rusdi Bin Abd Rashid

    Although alcohol consumption may produce effects that can be beneficial or harmful, alcohol consumption prevails among communities around the globe. Additionally, alcohol consumption patterns may be associated with several factors among communities and individuals. Numerous technologies and methods are implemented to enhance the detection and tracking of alcohol consumption, such as vehicle-integrated and wearable devices. In this paper, we present a cellular-based Internet of Things (IoT) implementation in a breath analyzer to enable data collection from multiple users via a single device. Cellular technology using hypertext transfer protocol (HTTP) was implemented as an IoT gateway. IoT integration enabled the direct retrieval of information from a database relative to the device and direct upload of data from the device onto the database. A manually developed threshold algorithm was implemented to quantify alcohol concentrations within a range from 0 to 200 mcg/100 mL breath alcohol content using electrochemical reactions in a fuel-cell sensor. Two data collections were performed: one was used for the development of the model and was split into two sets for model development and on-machine validation, and another was used as an experimental verification test. An overall accuracy of 98.16% was achieved, and relative standard deviations within the range from 1.41% to 2.69% were achieved, indicating the reliable repeatability of the results. The implication of this paper is that the developed device (an IoT-integrated breath analyzer) may provide practical assistance for healthcare representatives and researchers when conducting studies involving the detection and data collection of alcohol consumption patterns.


  • Open Access

    Review of 3D printing applications in orthopedic surgery

    by Kamruzzaman Joty, Shamini Janasekaran, Vin Cent Tai, Muhammad Urasim

    3D printing has been trending now-a-days and developing really fast, as it might play a very important role in our life in the next few years and even be more efficient in the medical field. Distinct geometries of bones generate complexity in orthopedic surgery which is now being simplified using 3D printing that revolutionized medical sector. This advanced technology helps doctors in terms of accuracy, visualization and efficient surgery which is also beneficial for patient. In this report we are going to review the applications of 3D printing in the orthopedic surgeries and how the technological advancement and futuristic benefits can help people to develop the healthcare sector and be more reliable in complicated surgeries.

  • Open Access

    Influences of automatic shielded metal arc welding (ASMAW) parameters on the microstructure of welded AISI1080 steel

    by Walisijiang Tayier, Shamini Janasekaran, Hamid Mehrabi

    In this research, mild steel AISI1080 was butt welded by an automated shielded metal arc technique (ASMAW) using E6013 electrode. Parameters such as welding speed (3.19, 3.9 and 4.6 mm/s), with the electrode diameter (2.6, 3.2 and 4.0 mm), and welding angle of (45, 50 and 60°), were tested and listed by Taguchi orthogonal arrays. Microstructure of welded samples were observed using scanning electron microscope (SEM). According to the microstructural observations, the amount of pearlitic phase in the weld area increased with increase in welding speed, and angle of electrode, and the smallest size electrode of 2.6mm at the expense of ferrite. However, in the HAZ the amount of ferrite increases with increase in welding speed and the electrode diameter.

  • Open Access

    Face recognition access control system based on Baidu AI cloud

    by Zhang Huan, Shamini Janasekaran, Yaw Yoong Sia

    This paper presents a face recognition intelligent access control system based on Raspberry Pi 4B and Baidu AI cloud. The access control system is mainly composed of three parts: Web server, PC terminal management system and access controller. The web server obtains the image through the camera, encodes and uploads it to the cloud platform for face comparison, and sends instructions to the access controller to control the access control switch according to the returned recognition results. Through the background management system website, the face database can be updated and the access information can be managed. The software part adopts the Linux system with the best compatibility with Raspberry pi and is written in Python. After testing, the whole system has high face recognition accuracy, low requirements for hardware equipment performance, easy installation and low cost. It is suitable for the expansion and transformation of face recognition function of the existing access control system.