Characterization and validation of multimodal annihilation-gamma/near-infrared/visible laparoscopic system

Authors:

Abstract
Compared to conventional open surgery, which utilizes images acquired before the surgery from computed tomography (CT), magnetic resonance imaging (MRI), positron emission tomography (PET), and other diagnostic modalities, minimally invasive robotic surgery (MIRS) has been widely used because of advantages such as less incision, fast recovery time, and the quality of patient care.1 – 3 Recently, near-infrared (NIR) image-guided surgeries have been used for the detection of sentinel lymph nodes (SLNs) and micro tumors during surgery, because these fluorescence systems provide relatively high sensitivity and superior resolution of <1  mm.4 – 7 They have also been used for colorectal, urological, and gynecological diseases to define the margin of the target to achieve minimal damage of the normal tissue and sensitive nerves. Among various fluorescence dyes for MIRS, a U.S. Food and Drug Administration-approved indocyanine green (ICG) dye with a peak emission wavelength of 820 nm has been used for SLN mapping and medical imaging for other lesions.8 – 12 However, the fluorescence has limited penetration depth (below 10 mm) because of its absorption and scattering in tissue such as skin, fat, and blood.13 – 15 For this reason, it is difficult to find SLNs or other target tissues covered with normal tissue. To overcome the depth limitation, multimodal imaging and hybrid methods have been used with radiation, ultrasound, and other compatible modalities. High-energy photons, such as x-rays and gamma rays, have relatively longer penetration depths despite radiation exposure, relatively low sensitivity, and poor spatial resolution.
Funding Information
  • National Research Foundation of Korea (NRF-2016M2A2A4A03913619)
  • National Research Foundation (NRF-2016M2A2A4A03913619)
  • National Research Foundation (NRF-2017M2A2A4A01071175)

This publication has 36 references indexed in Scilit: