Machine Learning-Based Classification of Dynamic Damage Modes in Rock–Concrete Composites Under Impact Loading
Open Access
Abstract
In tunnel engineering, rock–concrete composite structures may be subjected to dynamic loading induced by earthquakes, blasting, and rockbursts. This study investigated the dynamic response and damage evolution of granite- and sandstone-based composites with ordinary or fiber-reinforced concrete using split Hopkinson pressure bar (SHPB) impact tests at different impact velocities. Acoustic emission (AE) monitoring was combined with a Gaussian mixture model–support vector machine (GMM–SVM) framework to classify damage modes based on the rise-time-to-peak-amplitude ratio (RA) and average frequency (AF). Across the four specimen types, dynamic compressive strength ranged from 37.35 to 57.65 MPa under low-impact conditions and from 102.73 to 120.75 MPa under ultra-high-impact conditions. The corresponding dissipated energy values ranged from 34.19 to 64.12 J and from 192.98 to 266.81 J, respectively. Granite-based specimens exhibited a more pronounced double-peak response, whereas sandstone-based specimens showed more continuous post-peak softening. Fiber reinforcement improved post-peak load-bearing stability, although its effect on energy dissipation varied with impact velocity. AE activity was concentrated mainly during the early impact stage. Under medium-impact-velocity conditions, where damage-mode classification was performed, shear damage dominated in granite-based specimens (56.0% for GC-1 and 53.4% for GCF-1), whereas tensile damage dominated in sandstone-based specimens (52.6% for SC-1 and 59.9% for SCF-1). Fiber reinforcement increased the tensile-damage ratio in granite-based specimens from 44.0% to 46.6%. These findings clarify how rock type and fiber reinforcement influence the dynamic response and damage evolution of rock–concrete composites.Keywords
Funding Information
- Jianghan University (Grant No. BL202409)
- Education Department of Hunan Province (Grant No. 25B0198)
- Sichuan Provincial Engineering Research Center of Resource Utilization forAgricultural and Forestry Wastes (Grant No. NLFQW202614)
This publication has 30 references indexed in Scilit:
- Machine Learning-Based Study on Fracture Behavior and Damage Identification of Naturally Fractured Rock–Concrete InterfacesRock Mechanics and Rock Engineering, 2025
- Investigation of failure in anisotropic composite structures via an efficient data-driven multiscale strategyMeccanica, 2025
- Experimental study on physical and mechanical characteristics of rock-concrete combined body under complex stress conditionsConstruction and Building Materials, 2022
- Uniaxial tension damage mechanics of steel fiber reinforced concrete using acoustic emission and machine learning crack mode classificationCement and Concrete Composites, 2021
- Deformation and failure behaviours of rock-concrete interfaces with natural morphology under shear testingConstruction and Building Materials, 2021
- A 3DEC Numerical Analysis of the Interaction Between an Uneven Rock Surface and Shotcrete LiningRock Mechanics and Rock Engineering, 2021
- Static and dynamic tensile behavior of rock-concrete bi-material disc with different interface inclinationsConstruction and Building Materials, 2020
- Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission featuresConstruction and Building Materials, 2014
- Structural-concrete analysis and design: need for a sound underlying theoryArchive of Applied Mechanics, 2012
- Numerical investigation of concrete subjected to compressive impact loading. Part 1: A fundamental explanation for the apparent strength gain at high loading ratesComputers & Structures, 2008