QXQuanmin Xie

Quanmin Xie

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Quanmin Xie has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Machine Learning-Based Classification of Dynamic Damage Modes in Rock–Concrete Composites Under Impact Loading

    by Zhixuan Gao, Quanmin Xie, Yuzhu Guo, Yuntian Wang, Jin Wu

    In tunnel engineering, rock–concrete composite structures may be subjected to dynamic loading induced by earthquakes, blasting, and rockbursts. This study investigated the dynamic response and damage evolution of granite- and sandstone-based composites with ordinary or fiber-reinforced concrete using split Hopkinson pressure bar (SHPB) impact tests at different impact velocities. Acoustic emission (AE) monitoring was combined with a Gaussian mixture model–support vector machine (GMM–SVM) framework to classify damage modes based on the rise-time-to-peak-amplitude ratio (RA) and average frequency (AF). Across the four specimen types, dynamic compressive strength ranged from 37.35 to 57.65 MPa under low-impact conditions and from 102.73 to 120.75 MPa under ultra-high-impact conditions. The corresponding dissipated energy values ranged from 34.19 to 64.12 J and from 192.98 to 266.81 J, respectively. Granite-based specimens exhibited a more pronounced double-peak response, whereas sandstone-based specimens showed more continuous post-peak softening. Fiber reinforcement improved post-peak load-bearing stability, although its effect on energy dissipation varied with impact velocity. AE activity was concentrated mainly during the early impact stage. Under medium-impact-velocity conditions, where damage-mode classification was performed, shear damage dominated in granite-based specimens (56.0% for GC-1 and 53.4% for GCF-1), whereas tensile damage dominated in sandstone-based specimens (52.6% for SC-1 and 59.9% for SCF-1). Fiber reinforcement increased the tensile-damage ratio in granite-based specimens from 44.0% to 46.6%. These findings clarify how rock type and fiber reinforcement influence the dynamic response and damage evolution of rock–concrete composites.

  • Open Access

    Study on Damage Mechanisms and Blast Mitigation of GFRPU and Coated Steel Plates

    by Xiaojun Ye, Quanmin Xie, Dongxian Ye, Rui Zhang, Fuyin Gao, Yanshu Fu, Yongkang Xu, Yaoli Hu, Weibo Huang, Longqiang Liang

    Conventional fabrication processes for fiber-reinforced composites are complex and stepwise, limiting their application in blast protection engineering. In this study, KH550 surface-modified glass fiber powder (1.5 wt%) was incorporated into a polyurea matrix, and a homogeneous glass fiber-reinforced polyurea (GFRPU) composite was successfully synthesized via an optimized one-step spray process. The strain-rate-dependent mechanical behavior (0.01–100 s−1), fracture mechanisms, molecular structure, and blast mitigation performance of GFRPU were systematically investigated through mechanical testing, SEM, FTIR, 75 g TNT contact explosion tests, and calibrated and partially verified finite element simulations. Results show that the surface-modified fibers form chemical crosslinks with the matrix, shortening the N–H hydrogen bond length from 3.023 Å to 2.983 Å and increasing the hydrogen bonding degree of the urea carbonyl region from 80.0% to 84.1%, thereby enhancing structural ordering and strength. At a strain rate of 100 s−1, the tensile strength of GFRPU reaches 50.27 MPa, 26% higher than that of the polyurea matrix. Under contact explosion, a 4 mm back-face GFRPU coating reduced the center-point deflection of the steel plate by 31.6% and suppressed brittle cracking, with interfacial debonding and coating tensile failure as the dominant failure modes. Considering protective efficiency and structural safety, 4 mm is recommended as the optimal coating thickness.

  • Denoising algorithm for shotcrete acoustic emission signals based on IPSO-VMD and its application in damage feature extraction

    by Zheng Zhibin, Xie Quanmin, Jia Yongsheng, Zhou Hui, Xu Yongkang

    To address the challenges of nonlinearity, non-stationarity, and strong noise interference in acoustic emission (AE) signals during the damage evolution of shotcrete, this study proposes a novel adaptive denoising algorithm based on improved particle swarm optimization-variational mode decomposition (IPSO-VMD). By employing the minimum average envelope entropy as a fitness function, the optimal number of decomposition modes k and the penalty factor α in VMD are automatically determined, thereby eliminating the subjectivity inherent in conventional parameter selection. Effective intrinsic mode functions are identified using the correlation coefficient method, while noisy components are further refined through wavelet packet decomposition. The denoised AE signal is reconstructed by combining the retained effective components with the processed noisy components. Simulation experiments demonstrate that, compared with empirical mode decomposition and other commonly used denoising techniques, the proposed algorithm achieves substantial improvements in signal-to-noise ratio (SNR ⩾ 15.99 dB), root mean square error (RMSE ⩽ 0.0510), and normalized cross-correlation coefficient (NCC ⩾ 0.9877). Additional validation through uniaxial compression tests on shotcrete confirms that IPSO-VMD effectively suppresses environmental noise, reducing low-frequency noise events by 98.8%. Moreover, the dominant frequency characteristics are better preserved, with energy concentration in the 100–150 kHz range enhanced by 7.91%. Based on RA-AF features and Gaussian mixture model classification, the identification accuracy of tensile cracks improves by 5.2%. Overall, the proposed algorithm offers a reliable approach for the refined extraction of shotcrete damage evolution features, thereby supporting structural safety assessment and early warning applications.


  • Open Access

    Uniaxial Mechanical Behavior and Constitutive Modeling of Early-Age Steel Fiber-Reinforced Concrete Under Variable-Temperature Curing Conditions

    by Yongkang Xu, Quanmin Xie, Hui Zhou, Yongsheng Jia, Zhibin Zheng, Chong Pan

    In high geothermal tunnels (>28 °C), curing temperature critically affects early-age concrete mechanics and durability. Uniaxial compression tests under six curing conditions, combined with CT scanning and machine learning-based crack analysis, were used to evaluate the impacts of curing age, temperature, and fiber content. The test results indicate that concrete exhibits optimal development of mechanical properties under ambient temperature conditions. Specifically, the elastic modulus increased by 33.85% with age in the room-temperature group (RT), by 23.35% in the fiber group (F), and decreased by 26.75% in the varying-temperature group (VT). A Weibull statistical damage-based constitutive model aligned strongly with the experimental data (R2 > 0.99). Fractal analysis of CT-derived cracks revealed clear fractal characteristics in the log(Nr)–log(r) curves, demonstrating internal damage mechanisms under different thermal histories.


  • Open Access

    Dynamic Tensile Response of Seawater Coral Aggregate Concrete (SCAC) in Saturated State: Experimental and Numerical Simulation Study

    by Rui Li, Chaomin Mu, Yulin Qin, Hui Zhou, Quanmin Xie

    Seawater Coral Aggregate Concrete (SCAC), made using coral aggregates from marine environments, is gaining attention as a promising material for marine and coastal engineering applications. This study investigates the dynamic tensile behavior of SCAC under both dry and saturated conditions, with an emphasis on the effects of free water on its mechanical properties. The dynamic Brazilian splitting (DBS) tests were conducted to evaluate the dynamic tensile strength, strain rate sensitivity, failure modes, and fracture morphology of SCAC specimens. The results show that saturated SCAC specimens exhibit a reduction in dynamic tensile strength compared to dry specimens, with this difference becoming more pronounced at higher strain rates. The maximum reduction can be observed to be 17.87%. Additionally, saturated SCAC specimens demonstrate greater strain rate sensitivity than dry specimens, which highlights the significant influence of moisture on the material’s mechanical behavior. The failure modes of SCAC were found to be less severe under saturated conditions, suggesting that moisture suppresses crack propagation to some extent, thereby reducing brittleness. Numerical simulations based on the finite element analysis were conducted to simulate the dynamic tensile response; the comparison of numerical and experimental data indicates that adjusting material model parameters effectively simulates the behavior of saturated SCAC.


  • Open Access

    Spatial Adaptive Improvement Detection Network for Corroded Bolt Detection in Tunnels

    by Zhiwei Guo, Xianfeng Cheng, Quanmin Xie, Hui Zhou

    The detection of corroded bolts is crucial for tunnel safety. However, the specific directionality and complex texture of corroded bolt defects make current YOLO series models unable to identify them accurately. This study proposes a spatial adaptive improved detection network (SAIDN), which integrates a spatial adaptive improvement module (SAIM) that adaptively emphasizes important features and reduces interference, enhancing detection accuracy. The SAIM performs a detailed analysis and transformation of features in the spatial and channel dimensions, enhancing the model’s ability to recognize critical defect information. The use of depthwise separable convolutions and adaptive feature reweighting strategies improves detail processing capabilities and computational efficiency. Experimental results show that SAIDN significantly outperforms existing models in detection accuracy, achieving 94.4% accuracy and 98.5% recall, surpassing advanced models such as YOLOv9 and Cascade RCNN. These findings highlight the potential of SAIDN in enhancing subway tunnels’ safety and maintenance efficiency.

  • Open Access

    A Visual Survey of Tunnel Boring Machine (TBM) Performance in Tunneling Excavation: Mainstream Direction, Brief Review and Future Prospects

    by Yulin Zhang, Jian Zhou, Yingui Qiu, Danial Jahed Armaghani, Quanmin Xie, Peixi Yang, Chengpei Xu

    This study employs scientometric analysis to investigate the current trajectory of research on tunnel boring machine (TBM) performance and collaborative efforts. Utilizing software tools like Pajek 5.16 and VOSviewer 1.6.18, it scrutinizes literature from 2000 to 2021 sourced from the Web of Science (WOS). The findings illuminate TBM research as an interdisciplinary and intersectoral field attracting increasing national and institutional attention. Notable contributions from China, Iran, the United States, Turkey, and Australia underscore the global significance of TBM research. The recent upsurge in annual publications, primarily driven by Chinese research initiatives, reflects a renewed vigor in TBM exploration. Additionally, the paper presents a succinct evaluation of TBM advantages and drawbacks compared to conventional drill and blast methods, discussing key considerations in excavation methodology selection. Moreover, the study comprehensively reviews TBM performance prediction models, categorizing them into theoretical, empirical, and artificial intelligence-driven approaches. Finally, rooted in metaverse theory, the discourse delves into the immersive learning model and the architecture of a TBM metaverse. In the future, the immersive training and learning model diagram can be employed in scenarios such as employee training and the promotion of safety knowledge. Additionally, the TBM metaverse architecture can simulate, monitor, diagnose, predict, and control the organization, management, and service processes and behaviors of TBMs. This will enhance efficient collaboration across various aspects of the project production cycle. This forward-looking perspective anticipates future trends in TBM technology, emphasizing societal impact and enhancement of economic benefits.


  • Open Access

    A Secure and Cost-Effective Training Framework Atop Serverless Computing for Object Detection in Blasting Sites

    by Tianming Zhang, Zebin Chen, Haonan Guo, Bojun Ren, Quanmin Xie, Mengke Tian, Yong Wang

    The data analysis of blasting sites has always been the research goal of relevant researchers. The rise of mobile blasting robots has aroused many researchers’ interest in machine learning methods for target detection in the field of blasting. Serverless Computing can provide a variety of computing services for people without hardware foundations and rich software development experience, which has aroused people’s interest in how to use it in the field of machine learning. In this paper, we design a distributed machine learning training application based on the AWS Lambda platform. Based on data parallelism, the data aggregation and training synchronization in Function as a Service (FaaS) are effectively realized. It also encrypts the data set, effectively reducing the risk of data leakage. We rent a cloud server and a Lambda, and then we conduct experiments to evaluate our applications. Our results indicate the effectiveness, rapidity, and economy of distributed training on FaaS.


  • Open Access

    Predictive model of back-wall overpressure behind a cantilever wall

    by Quanmin Xie, Xinzhe Nian, Hui Zhou, Jianyuan Wu

    To reduce the hazards posed by blast shock waves, important potential targets are usually shielded by cantilever walls. The main factor that indicates whether there is damage is the back-wall overpressure, and of concern here is predicting the back-wall overpressure behind a rigid cantilever wall. This was measured in full-scale blast experiments using 20 kg of trinitrotoluene (TNT) located on the ground, and the experimental data reveal how the cantilever wall mitigates the shock wave. A 3D numerical model was established to determine how the wall size influences the diffraction of the shock wave and the peaks and attenuation of the back-wall overpressure. Based on the numerical results and dimensional analysis, a model is proposed that provides an effective means of predicting the back-wall overpressure rapidly from the TNT equivalent, the standoff distance, and the height of the wall.