Nano-wollastonite to improve fire retardancy in medium-density fiberboard (MDF) made from wood fibers and camel-thorn
- 12 July 2019
- journal article
- research article
- Published by Taylor & Francis in Wood Material Science & Engineering
- Vol. 16 (3) , 161-165
Abstract
Wollastonite is an abundant mineral containing silicon, calcium and oxygen that has been shown to improve the properties of wood-based panels. Camel thorn (Alhagi maurorum) is a weed growing across much of Central Asia, and has relatively few commercial uses. The effects of addition of nano-wollastonite (NW) and camel-thorn chips on fire resistance of medium-density fiberboard (MDF) were assessed. Addition of 5 or 10% NW to urea-formaldehyde resin produced significant improvements in times to onset of ignition and glowing, as well as duration of burning in the panels. NW acted as a non-combustible mineral insulating layer. DFT analysis suggested that bonds between NW and wood cell-wall polymers improved overall panel properties by better integrating fibers into the composite matrix. The increased thermal conductivity caused by addition of NW also improved resin curing. Addition of 5 or 10% camel thorn chips to the resin prior to pressing negatively impacted fire properties. The results illustrate the potential for improving fire properties in MDF properties using NW.Keywords
This publication has 33 references indexed in Scilit:
- Nano-engineered plywood panels: Performance propertiesComposites Part B: Engineering, 2014
- Effects of the Improvement in Thermal Conductivity Coefficient by Nano-Wollastonite on Physical and Mechanical Properties in Medium-Density Fiberboard (MDF)BioResources, 2014
- Developing Environmentally Friendly Wood Composite Panels by NanotechnologyBioResources, 2013
- Use of aluminum oxide nanoparticles in wood composites to enhance the heat transfer during hot-pressingEuropean Journal of Wood and Wood Products, 2013
- Properties of particleboard made from kenaf (Hibiscus cannabinus L.) as function of particle geometryMaterials & Design (1980-2015), 2012
- Green composites: An overviewPolymer Composites, 2011
- Influence of nanoclay on urea‐formaldehyde resins for wood adhesives and its modelJournal of Applied Polymer Science, 2008
- Investigation of the effects of bark fiber as core material and its resin content on three-layer MDF performance by response surface methodologyWood Science and Technology, 2007
- Are natural fiber composites environmentally superior to glass fiber reinforced composites?Composites Part A: Applied Science and Manufacturing, 2004
- Heat release and classification of fire retardant wood productsFire and Materials, 1995