Morphology, Thermal and Mechanical Properties of Co-Continuous Porous Structure of PLA/PVA Blends by Phase Separation
Open Access
Abstract
Poly (lactic acid) (PLA) was blended with poly (vinyl alcohol) (PVA) in the composition of 70/30 (L7V3), 60/40 (L6V4), and 50/50 (L5V5) wt.%. L7V3 exhibits a sea–island morphology, while L6V4 and L5V5 show co-continuous phase morphologies. These polymers exhibited a solitary glass transition temperature, which obeyed the Fox equation. Thereafter, the blends were made porous by an etching process in hot water (35 °C) for 0–7 days, to remove PVA. The maximum etched PVA content of L7V3, L6V4, and L5V5 was 0.5%, 13.4%, and 36.1%, respectively; hence, L5V5 exhibited a co-continuous porous morphology with the porosity of 43.4%, the degree of swelling of 47.5%, and the pore size of 2 µm. The degree of crystallinity of PLA, exposed PLA, and L7V3 showed an insignificant change. L5V5, having the highest porosity, demonstrated the highest increase in the degree of crystallinity of approximately two times, because water induced the crystallization of PLA. The high porosity of L5V5 exhibited an excellent absorption property by increasing absorption energy more than two times, as obtained by micro indention. It had the maximum indentation depth more than 250 µm. Flexural and tensile properties considerably decreased with an increase in the porosity.Keywords
Funding Information
- Japan Society for the Promotion of Science (JP18H05483)
This publication has 47 references indexed in Scilit:
- Solvent-free fabrication of three dimensionally aligned polycaprolactone microfibers for engineering of anisotropic tissuesBiomedical Microdevices, 2012
- Poly(lactide- co -glycolide) porous scaffolds for tissue engineering and regenerative medicineInterface Focus, 2012
- An injection molding process for manufacturing highly porous and interconnected biodegradable polymer matrices for use as tissue engineering scaffoldsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2009
- Micro‐ and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and InterfacesMacromolecular Chemistry and Physics, 2007
- A method for solvent-free fabrication of porous polymer using solid-state foaming and ultrasound for tissue engineering applicationsBiomaterials, 2006
- Three Stages of Crystallization in Poly(ethylene terephthalate) during Mass TransportMacromolecules, 2002
- Miscibility and phase structure of binary blends of poly(L‐lactide) and poly(vinyl alcohol)Journal of Applied Polymer Science, 2001
- Reinforced poly(L‐lactic acid) fibres as suture materialJournal of Applied Biomaterials, 1995
- The Role of Matrix Mechanical Stress in Swelling Equilibrium and Transport through NetworksMacromolecules, 1980
- Diffusion in glassy polymersJournal of Polymer Science Part C: Polymer Symposia, 1966