NANOMECHANICAL PROPERTIES OF A Sn–Ag–Cu SOLDER REINFORCED WITH Ni-COATED CARBON NANOTUBES
- 1 August 2010
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in International Journal of Nanoscience
- Vol. 09 (04) , 283-287
Abstract
In the present study, 0.05 wt.% of Ni -coated multi-walled carbon nanotubes ( Ni -CNTs) were successfully incorporated into the 95.8Sn–3.5Ag–0.7Cu solder using the powder metallurgy technique, to synthesize a new lead-free composite solder. Its mechanical property (in terms of hardness) was investigated at room temperature using the nanoindentation method. The results revealed that the nanoindentation hardness increased by 14.3% with the incorporation of 0.05 wt.% of Ni -coated CNTs. This observation is in good agreement with the microhardness test results. Moreover, the addition of Ni -CNTs improved the creep resistance of the composite solder. The test results established that nanotechnology coupled with composite technology in electronics solders can result in the enhancement of mechanical properties. These advanced interconnect materials will thus benefit the microelectronics assembly and packaging industry.Keywords
This publication has 23 references indexed in Scilit:
- Intermediate decomposition of metastable Cu5Zn8 phase in the soldered Sn–Ag–Zn/Cu interfaceJournal of Alloys and Compounds, 2008
- Effects of Co addition in eutectic Sn–3.5Ag solder on shear strength and microstructural developmentMicroelectronic Engineering, 2008
- Microstructural and mechanical properties of Sn–Ag–Cu lead-free solders with minor addition of Ni and/or CoJournal of Materials Science, 2008
- Effects of Trace Amounts of Rare Earth Additions on Microstructure and Properties of Sn-Bi-Based Solder AlloyJournal of Electronic Materials, 2008
- Effect of Carbon Nanotubes on the Shear Strength and Electrical Resistivity of a Lead-Free SolderJournal of Electronic Materials, 2008
- Effect of Zn addition, strain rate and deformation temperature on the tensile properties of Sn–3.3 wt.% Ag solder alloyMaterials Characterization, 2007
- Electromigration effect on intermetallic growth and Young’s modulus in SAC solder jointJournal of Electronic Materials, 2006
- Adhesive strength and tensile fracture of Ni particle enhanced Sn–Ag composite solder jointsMaterials Science and Engineering: A, 2006
- Effect of composition and cooling rate on microstructure and tensile properties of Sn–Zn–Bi alloysJournal of Alloys and Compounds, 2003
- Helical microtubules of graphitic carbonNature, 1991