Numerical and experimental investigation of three-dimensional strains in adhesively bonded joints
Authors:
- 1 November 2006
- journal article
- research article
- Published by SAGE Publications in The Journal of Strain Analysis for Engineering Design
- Vol. 41 (8) , 583-596
Abstract
Strain distributions within adhesively bonded double-lap shear joints under tensile load have been investigated experimentally using the complementary experimental techniques of neutron diffraction (ND) and moire interferometry (MI). ND provides three-dimensional strain values within the samples, whereas MI gives high-resolution maps of the in-plane strain components at the surface. The resulting comprehensive datasets obtained from both aluminium and steel joints were compared against finite element (FE) predictions. The importance of a range of factors (e.g. two-dimensional versus three-dimensional geometry, sample asymmetry, residual strains) was assessed through development of the FE model and detailed comparison with the experimental data. The main conclusions were that FEA can be used accurately to predict strains in the adherends of bonded lap joints and that many of the simplifications of the joints commonly used in the analysis of bonded joints are justified as including them results in relatively small differences compared with sample-to-sample variation and the safety factors used in designing bonded joints.Keywords
This publication has 19 references indexed in Scilit:
- A comparison of failure prediction methods for an adhesively bonded composite beamThe Journal of Strain Analysis for Engineering Design, 2004
- Modelling interfacial degradation using interfacial rupture elementsThe Journal of Adhesion, 2003
- Direct Measurement of Longitudinal Strains and Stresses within Single Lap Shear Adhesive Joints Using Neutron DiffractionThe Journal of Adhesion, 1999
- Unwrapping noisy phase maps by use of a minimum-cost-matching algorithmApplied Optics, 1995
- The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap jointsComposite Structures, 1995
- Three-dimensional deformations in a single-lap jointThe Journal of Strain Analysis for Engineering Design, 1994
- Mechanical properties of adhesives in situ and in bulkInternational Journal of Adhesion and Adhesives, 1994
- A comparison of two- and three- dimensional finite element analyses of adhesive jointsInternational Journal of Adhesion and Adhesives, 1993
- Study of deformation field of interface crack in adhesive jointEngineering Fracture Mechanics, 1993
- Deformation in adhesive joints using moiré interferometryInternational Journal of Adhesion and Adhesives, 1987